The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-01-504-4982, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. Government technical data includes 26 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-01-504-4982 |
| Item Name | Resistor,variable,nonwire Wound, |
| FSC / FSG | 5905 / 59 — Resistor |
| Status | ACTIVE |
| Body Diameter | 1.125 INCHES MAXIMUM IN |
| Electrical Resistance Per Section | 1.0 KILOHMS SINGLE SECTION |
| Mounting Lip Depth | 0.0620 INCHES NOMINAL IN |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 125.0 SINGLE SECTION |
| Undercut Width | 0.0570 INCHES MINIMUM IN |
| Section Quantity | 1 |
| Shaft Diameter | 0.125 INCHES NOMINAL IN |
| Undercut Diameter | 0.975 INCHES MAXIMUM IN |
| Body Style | CYLINDRICAL SERVO MOUNTED |
| Mounting Method | CLAMP RING(S) |
| Maximum Starting Torque | 0.50 INCH-OUNCES IN |
| Terminal Location | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED |
| Mounting Lip Diameter | 1.0620 INCHES NOMINAL IN |
| Shaft Style | ROUND, SLOTTED |
| Actuator Type | SINGLE SHAFT |
| Shaft Length | 0.500 INCHES NOMINAL IN |
| Specification/standard Data | 81349-MIL-PRF-39023/2 GOVERNMENT SPECIFICATION |
| Pilot Diameter | 0.9688 INCHES NOMINAL IN |
| Body Length | 0.810 INCHES MAXIMUM IN |
| Pilot Length | 0.0620 INCHES NOMINAL IN |
| Power Dissipation Rating Per Section in Watts | 1.25 FREE AIR SINGLE SECTION |
| Reliability Indicator | NOT ESTABLISHED |
| Test Data Document | 81349-MIL-PRF-39023 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Resistance Tolerance Per Section in Percent | -10.0 TO 10.0 SINGLE SECTION |
| Terminal Type and Quantity | 3 TAB, SOLDER LUG |
| Ambient Temp in Deg Celsius Per Section at Full Rated Power | 70.0 SINGLE SECTION |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| RQ110AB23CB102 | 2/2 Government specification standardization U.S. Government activity |
| MIL-PRF-39023/2 | 4/1 Identification reference U.S. Government activity |
NSN 5905-01-504-4982 is a Resistor,variable,nonwire Wound,, classified under FSC 5905, Resistor. Status: active.
Key specifications for 5905-01-504-4982: Body Diameter: 1.125 INCHES MAXIMUM IN; Electrical Resistance Per Section: 1.0 KILOHMS SINGLE SECTION; Mounting Lip Depth: 0.0620 INCHES NOMINAL IN; Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 125.0 SINGLE SECTION. 26 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.