The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-01-472-7463, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. Government technical data includes 29 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-01-472-7463 |
| Item Name | Resistor,variable,nonwire Wound, |
| FSC / FSG | 5905 / 59 — Resistor |
| Status | ACTIVE |
| Maximum Running Torque | 5.00 INCH-OUNCES IN |
| Electrical Resistance Per Section | 10.0 KILOHMS SINGLE SECTION |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 150.0 SINGLE SECTION |
| Section Quantity | 1 |
| Shaft Diameter | 0.050 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN |
| Shaft Bearing Type | ROLLER |
| Body Style | RECTANGULAR |
| Contact Arm Electrical Off Position | FULLY CCW |
| Terminal Length | 0.300 INCHES MINIMUM IN |
| Mounting Method | TERMINAL |
| Body Width | 0.145 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN |
| Body Height | 0.310 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN |
| Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius | -50.0 TO 50.0 SINGLE SECTION |
| Terminal Location | REAR END |
| Reliability Failure Rate Level in Percent | 0.001 |
| Center to Center Distance Between Center Terminal and Outside Terminal | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN |
| Features Provided | NONMETALLIC SHAFT |
| Shaft Style | ROUND, SLOTTED |
| Actuator Type | SINGLE SHAFT |
| Shaft Length | 0.080 INCHES MAXIMUM IN |
| Specification/standard Data | 81349-MIL-PRF-39035/2 GOVERNMENT SPECIFICATION |
| Body Length | 0.420 INCHES MAXIMUM IN |
| Center to Center Distance Between Terminals | 0.180 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN |
| Power Dissipation Rating Per Section in Watts | 0.5 FREE AIR SINGLE SECTION |
| Effective Electrical Rotation in Deg Angular Rotation | 5400.0 MINIMUM |
| Reliability Indicator | ESTABLISHED |
| Actuator Travel Control Feature | CLUTCH |
| Test Data Document | 81349-MIL-PRF-39035 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Resistance Tolerance Per Section in Percent | -10.0 TO 10.0 SINGLE SECTION |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| ES4267-103WR | 3/9 Design control — primary reference Drs Sustainment Systems, Inc. |
NSN 5905-01-472-7463 is a Resistor,variable,nonwire Wound,, classified under FSC 5905, Resistor. Status: active.
Key specifications for 5905-01-472-7463: Maximum Running Torque: 5.00 INCH-OUNCES IN; Electrical Resistance Per Section: 10.0 KILOHMS SINGLE SECTION; Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 150.0 SINGLE SECTION; Section Quantity: 1. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.