PartsTable TECHNICAL DATA SHEET
NSN 5905-01-337-6354Government record, cited

Resistor, Variable, Wire Wound, Pre5905-01-337-6354

NSN 5905-01-337-6354 · NIIN 013376354 · Part number L04385
Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) · FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components · CAGE 16236
Government record, cited
NSN 5905-01-337-6354 — this item is cataloged by the U.S. Government under National Stock Number 5905-01-337-6354. Manufacturer of record part number: L04385.
Also searched as  5905-01-337-6354 · 5905013376354 · NIIN 013376354 · 01-337-6354 · FSC 5905 Resistor · CAGE 16236 · L04385 · 15A2105-1 · 5611R250L0.5 · 5611-2263-0
Nearby stock numbers  ·
Features
  • Resistor,variable,wire Wound,pre — FSC 5905
  • Maximum Running Torque: 1.10 INCH-OUNCES IN
  • Body Diameter: 1.984 INCHES MINIMUM AND 2.016 INCHES MAXIMUM IN
  • Screw Thread Quantity Per Inch: 32.0
  • Electrical Resistance Per Section: 250.0 OHMS ALL SECTIONS
  • Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 125.0 ALL SECTIONS
  • Section Quantity: 2
  • Shaft Diameter: 0.250 INCHES NOMINAL IN
Identification
  • NSN: 5905-01-337-6354
  • NIIN: 013376354
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: L04385
  • Manufacturer: Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)
General Description

The Resistor,variable,wire Wound,pre, cataloged under National Stock Number 5905-01-337-6354, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings). Government technical data includes 28 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-01-337-6354
Primary Part NumberL04385
Item NameResistor,variable,wire Wound,pre
FSC / FSG5905 / 59 — Resistor
ManufacturerDla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)
StatusACTIVE
Maximum Running Torque1.10 INCH-OUNCES IN
Body Diameter1.984 INCHES MINIMUM AND 2.016 INCHES MAXIMUM IN
Screw Thread Quantity Per Inch32.0
Electrical Resistance Per Section250.0 OHMS ALL SECTIONS
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power125.0 ALL SECTIONS
Section Quantity2
Shaft Diameter0.250 INCHES NOMINAL IN
Fragility FactorMODERATELY RUGGED
Function Characteristic Per SectionALL SECTIONS LINEAR
Body StyleCYLINDRICAL BUSHING MOUNTED
Function Conformity Tolerance Per Section-0.50 TO 0.50 ALL SECTIONS
Mounting MethodSTANDARD BUSHING
Criticality Code JustificationFEAT
Maximum Starting Torque1.50 INCH-OUNCES IN
Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius-20.0 TO 20.0 ALL SECTIONS
Terminal LocationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
Features ProvidedHUMIDITY PROOF
Shaft StyleROUND
Actuator TypeSINGLE SHAFT
Shaft Length0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN
Body Length2.310 INCHES NOMINAL IN
Power Dissipation Rating Per Section in Watts2.0 FREE AIR ALL SECTIONS
Effective Electrical Rotation in Deg Angular Rotation356.0 NOMINAL
Screw Thread Diameter0.375 INCHES NOMINAL IN
Bearing TypeSLEEVE SHAFT
Reliability IndicatorNOT ESTABLISHED
Screw Thread Series DesignatorUNEF
Actuator Travel Control FeatureCONTINUOUS MOTION
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeY
Cross-Reference Index
Part NumberManufacturer
L04385 PRIMARY Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) (USA)
Reference documents
ReferenceMeaning
15A2105-1 3/1 Design control — primary reference
Eaton Aerospace Llc Dba Eaton Inoac Div Fluid & Electrical Distribution
5611R250L0.5 5/9 Secondary reference
Rosemount Analytical Inc
5611-2263-0 3/1 Design control — primary reference
Bi Technologies Corporation Div Bi Technologies Corp.
No interchangeability data on file.
Other items in FSC 5905 — Resistor
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5905-00-000-0136
RESISTOR NETWORK,FIXED,FILM
5905-00-000-0488
5905-00-000-0488 · Item name not on file
5905-00-000-8809
5905-00-000-8809 · Item name not on file
5905-00-000-8833
5905-00-000-8833 · Item name not on file
5905-00-000-9526
5905-00-000-9526 · Item name not on file
5905-00-001-1342
5905-00-001-1342 · Item name not on file
5905-00-001-1573
5905-00-001-1573 · Item name not on file
5905-00-001-2059
5905-00-001-2059 · Item name not on file

Frequently Asked Questions

What is NSN 5905-01-337-6354?

NSN 5905-01-337-6354 is a Resistor,variable,wire Wound,pre, manufactured by Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings), classified under FSC 5905, Resistor. Status: active.

What part numbers are listed for NSN 5905-01-337-6354?

NSN 5905-01-337-6354 has 1 manufacturer part number on file: L04385 (Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)).

What are the specifications of L04385?

Key specifications for L04385: Maximum Running Torque: 1.10 INCH-OUNCES IN; Body Diameter: 1.984 INCHES MINIMUM AND 2.016 INCHES MAXIMUM IN; Screw Thread Quantity Per Inch: 32.0; Electrical Resistance Per Section: 250.0 OHMS ALL SECTIONS. 28 specifications are documented in the U.S. Government catalog.

Is NSN 5905-01-337-6354 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com