The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-01-317-1772, is classified within Federal Supply Class 5905 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is L3 Technologies, Inc. Div L3 Keo. Government technical data includes 29 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 4 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 3 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-01-317-1772 |
| Primary Part Number | 910207 |
| Item Name | Resistor,variable,nonwire Wound, |
| FSC / FSG | 5905 / 59 — No Item Name Available |
| Manufacturer | L3 Technologies, Inc. Div L3 Keo |
| Status | ACTIVE |
| Shaft Length | 0.500 INCHES NOMINAL IN |
| Effective Electrical Rotation in Deg Angular Rotation | 292.0 MINIMUM AND 298.0 MAXIMUM |
| Ambient Temp in Deg Celsius Per Section at Full Rated Power | 70.0 SINGLE SECTION |
| Test Data Document | 81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Terminal Type and Quantity | 3 TAB, SOLDER LUG |
| Mounting Bushing Length | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN |
| Actuator Type | SINGLE SHAFT |
| Section Quantity | 1 |
| Power Dissipation Rating Per Section in Watts | 0.5 FREE AIR SINGLE SECTION |
| Body Style | CYLINDRICAL BUSHING MOUNTED |
| Resistance Tolerance Per Section in Percent | -10.0 TO 10.0 SINGLE SECTION |
| Actuator Travel Control Feature | STOPS |
| Terminal Location | REAR END |
| Specification/standard Data | 81349-MIL-R-94/3 GOVERNMENT SPECIFICATION |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 120.0 SINGLE SECTION |
| Device Design Type | NONTURN AT 10:30 OCLOCKUNABLE TO DECODE |
| Device Design Type | NONTURN AT 4:30 OCLOCKUNABLE TO DECODE |
| Screw Thread Diameter | 0.250 INCHES NOMINAL IN |
| Nonturn Device Radius | 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Screw Thread Series Designator | UNEF |
| Screw Thread Quantity Per Inch | 32.0 |
| Resistance Temp Characteristic Range Per Section in Percent | -3.0 TO 0.0 -55 DEG CELSIUS SINGLE SECTION AND -5.0 TO 10.0 -25 DEG CELSIUS SINGLE SECTION AND -5.0 TO 10.0 25 DEG CELSIUS SINGLE SECTION AND +0.0 TO 3.0 120 DEG CELSIUS SINGLE SECTION |
| Electrical Resistance Per Section | 1.0 KILOHMS SINGLE SECTION |
| Mounting Method | STANDARD BUSHING |
| Features Provided | PANEL SEAL AND SHAFT SEAL |
| Fragility Factor | MODERATELY RUGGED |
| Rotary Actuator Travel in Angular Deg | 292.0 MINIMUM AND 298.0 MAXIMUM |
| Maximum Stop Torque | 48.00 INCH-OUNCES IN |
| Maximum Starting Torque | 6.00 INCH-OUNCES IN |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 910207 | L3 Technologies, Inc. Div L3 Keo (USA) |
| MIL-R-94/3 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| RV6SAYSB102A | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MIL-PRF-94/3 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5905-01-317-1772 is a Resistor,variable,nonwire Wound,, manufactured by L3 Technologies, Inc. Div L3 Keo, classified under FSC 5905 (No Item Name Available). Status: active.
NSN 5905-01-317-1772 has 4 cross-referenced part numbers: 910207 (L3 Technologies, Inc. Div L3 Keo), MIL-R-94/3 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), RV6SAYSB102A (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MIL-PRF-94/3 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There are 3 known substitutes for 5905-01-317-1772: 5950-00-645-7884, 6740-00-904-5850, 5935-00-951-8052. Verify interchangeability with system specifications before substitution.
Key specifications for 910207: Shaft Length: 0.500 INCHES NOMINAL IN; Effective Electrical Rotation in Deg Angular Rotation: 292.0 MINIMUM AND 298.0 MAXIMUM; Ambient Temp in Deg Celsius Per Section at Full Rated Power: 70.0 SINGLE SECTION; Test Data Document: 81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).. 30 total characteristics are documented in the Federal Logistics Information System.