The Resistor,variable,wire Wound,pre, cataloged under National Stock Number 5905-01-293-2391, is classified within Federal Supply Class 5905 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 30 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 5 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-01-293-2391 |
| Primary Part Number | MIL-PRF-12934/4 |
| Item Name | Resistor,variable,wire Wound,pre |
| FSC / FSG | 5905 / 59 — No Item Name Available |
| Manufacturer | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| Status | ACTIVE |
| Shaft Diameter | 0.2494 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Features Provided | HUMIDITY PROOF |
| Fragility Factor | MODERATELY RUGGED |
| Rotary Actuator Travel in Angular Deg | 360.0 NOMINAL |
| Electrical Resistance Per Section | 20.0 KILOHMS SINGLE SECTION |
| Lateral Runout | 0.002 INCHES IN |
| Shaft Radial Play | 0.002 INCHES IN |
| Effective Electrical Rotation in Deg Angular Rotation | 348.0 MINIMUM AND 352.0 MAXIMUM |
| Shaft End Play | 0.005 INCHES IN |
| Mounting Method | CLAMP RING(S) |
| Maximum Starting Torque | 1.00 INCH-OUNCES IN |
| Function Conformity Tolerance Per Section | -1.00 TO 1.00 SINGLE SECTION |
| Cubic Measure | 4.122 CUBIC INCHES |
| Shaft Runout | 0.002 INCHES IN |
| Pilot Diameter Runout | 0.001 INCHES IN |
| Actuator Type | SINGLE SHAFT |
| Maximum Running Torque | 1.00 INCH-OUNCES IN |
| Terminal Location | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED |
| Terminal Type and Quantity | 3 TAB, SOLDER LUG |
| Specification/standard Data | 81349-MIL-R-12934/4 GOVERNMENT SPECIFICATION |
| Resistance Tolerance Per Section in Percent | -3.0 TO 3.0 SINGLE SECTION |
| Test Data Document | 81349-MIL-R-12934 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Actuator Travel Control Feature | CONTINUOUS MOTION |
| Power Dissipation Rating Per Section in Watts | 4.0 FREE AIR SINGLE SECTION |
| Function Characteristic Per Section | SINGLE SECTION LINEAR |
| Ambient Temp in Deg Celsius Per Section at Full Rated Power | 85.0 SINGLE SECTION |
| Mounting Lip Diameter | 1.9900 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM IN |
| Bearing Type | SLEEVE SHAFT |
| Body Length | 1.312 INCHES MAXIMUM IN |
| Pilot Diameter | 1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MIL-PRF-12934/4 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| RR2000D3C9G203 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MIL-R-12934/4 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5905-01-293-2391 is a Resistor,variable,wire Wound,pre, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5905 (No Item Name Available). Status: active.
NSN 5905-01-293-2391 has 3 cross-referenced part numbers: MIL-PRF-12934/4 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), RR2000D3C9G203 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MIL-R-12934/4 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There are 5 known substitutes for 5905-01-293-2391: 5905-01-154-6767, 5905-01-241-5910, 5905-01-293-2392 and 2 more. Verify interchangeability with system specifications before substitution.
Key specifications for MIL-PRF-12934/4: Shaft Diameter: 0.2494 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN; Features Provided: HUMIDITY PROOF; Fragility Factor: MODERATELY RUGGED; Rotary Actuator Travel in Angular Deg: 360.0 NOMINAL. 30 total characteristics are documented in the Federal Logistics Information System.