The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-01-270-1695, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Lockheed Martin Corporation. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-01-270-1695 |
| Primary Part Number | P39035-006-15 |
| Item Name | Resistor,variable,nonwire Wound, |
| FSC / FSG | 5905 / 59 — Resistor |
| Manufacturer | Lockheed Martin Corporation |
| Status | ACTIVE |
| Maximum Running Torque | 3.00 INCH-OUNCES IN |
| Electrical Resistance Per Section | 20.0 KILOHMS SINGLE SECTION |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 150.0 SINGLE SECTION |
| Section Quantity | 1 |
| Shaft Diameter | 0.055 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN |
| Body Style | RECTANGULAR |
| Terminal Length | 0.025 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN |
| Mounting Method | TERMINAL |
| Body Width | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN |
| Body Height | 0.155 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN |
| Maximum Starting Torque | 3.00 INCH-OUNCES IN |
| Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius | -100.0 TO 100.0 SINGLE SECTION |
| Terminal Location | FRONT-REAR |
| Center to Center Distance Between Center Terminal and Outside Terminal | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN |
| Shaft Style | ROUND, SLOTTED |
| Actuator Type | SINGLE SHAFT |
| Shaft Length | 0.040 INCHES NOMINAL IN |
| Body Length | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN |
| Center to Center Distance Between Terminals | 0.180 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN |
| Power Dissipation Rating Per Section in Watts | 0.25 FREE AIR SINGLE SECTION |
| Effective Electrical Rotation in Deg Angular Rotation | 4320.0 NOMINAL |
| Reliability Indicator | NOT ESTABLISHED |
| Cubic Measure | 0.013 CUBIC INCHES |
| Actuator Travel Control Feature | CLUTCH |
| Test Data Document | 04939-+39035-006 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Resistance Tolerance Per Section in Percent | -10.0 TO 10.0 SINGLE SECTION |
| Terminal Type and Quantity | 3 PIN |
| Rotary Actuator Travel in Angular Deg | 5760.0 NOMINAL |
| Ambient Temp in Deg Celsius Per Section at Full Rated Power | 85.0 SINGLE SECTION |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| P39035-006-15 PRIMARY | Lockheed Martin Corporation (USA) |
| 3269P-EG2-203 | Bourns Inc (USA) |
NSN 5905-01-270-1695 is a Resistor,variable,nonwire Wound,, manufactured by Lockheed Martin Corporation, classified under FSC 5905, Resistor. Status: active.
NSN 5905-01-270-1695 has 2 manufacturer part numbers on file: P39035-006-15 (Lockheed Martin Corporation), 3269P-EG2-203 (Bourns Inc).
Key specifications for P39035-006-15: Maximum Running Torque: 3.00 INCH-OUNCES IN; Electrical Resistance Per Section: 20.0 KILOHMS SINGLE SECTION; Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 150.0 SINGLE SECTION; Section Quantity: 1. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.