PartsTable TECHNICAL DATA SHEET
NSN 5905-01-212-5435Government record, cited

Resistor, Variable, Wire Wound, Pre5905-01-212-5435

NSN 5905-01-212-5435 · NIIN 012125435 · Part number ED741501-501
Hamilton Sundstrand Corporation Dba Collins Aerospace · FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components · CAGE 73030
Government record, cited
NSN 5905-01-212-5435 — this item is cataloged by the U.S. Government under National Stock Number 5905-01-212-5435. Manufacturer of record part number: ED741501-501.
Also searched as  5905-01-212-5435 · 5905012125435 · NIIN 012125435 · 01-212-5435 · FSC 5905 Resistor · CAGE 73030 · ED741501-501
Nearby stock numbers  ·
Features
  • Resistor,variable,wire Wound,pre — FSC 5905
  • Maximum Running Torque: 5.00 INCH-OUNCES IN
  • Electrical Resistance Per Section: 500.0 OHMS SINGLE SECTION
  • Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 150.0 SINGLE SECTION
  • Section Quantity: 1
  • Shaft Diameter: 0.050 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
  • Fragility Factor: MODERATELY RUGGED
  • Function Characteristic Per Section: SINGLE SECTION LINEAR
Identification
  • NSN: 5905-01-212-5435
  • NIIN: 012125435
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: ED741501-501
  • Manufacturer: Hamilton Sundstrand Corporation Dba Collins Aerospace
General Description

The Resistor,variable,wire Wound,pre, cataloged under National Stock Number 5905-01-212-5435, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Hamilton Sundstrand Corporation Dba Collins Aerospace. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-01-212-5435
Primary Part NumberED741501-501
Item NameResistor,variable,wire Wound,pre
FSC / FSG5905 / 59 — Resistor
ManufacturerHamilton Sundstrand Corporation Dba Collins Aerospace
StatusACTIVE
Maximum Running Torque5.00 INCH-OUNCES IN
Electrical Resistance Per Section500.0 OHMS SINGLE SECTION
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power150.0 SINGLE SECTION
Section Quantity1
Shaft Diameter0.050 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
Fragility FactorMODERATELY RUGGED
Function Characteristic Per SectionSINGLE SECTION LINEAR
Body StyleRECTANGULAR
Function Conformity Tolerance Per Section-1.000 TO 1.000 SINGLE SECTION
Terminal Length0.172 INCHES MINIMUM IN
Mounting MethodTERMINAL
Body Width0.140 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
Body Height0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
Maximum Starting Torque5.00 INCH-OUNCES IN
Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius-50.0 TO 50.0 SINGLE SECTION
Terminal LocationREAR END LOCATION NOT OTHERWISE SPECIFIED
Center to Center Distance Between Center Terminal and Outside Terminal0.100 INCHES NOMINAL IN
Features ProvidedHUMIDITY PROOF
Shaft StyleROUND, SLOTTED
Actuator TypeSINGLE SHAFT
Shaft Length0.080 INCHES MAXIMUM IN
Body Length0.420 INCHES MAXIMUM IN
Center to Center Distance Between Terminals0.200 INCHES NOMINAL IN
Power Dissipation Rating Per Section in Watts0.75 FREE AIR SINGLE SECTION
Effective Electrical Rotation in Deg Angular Rotation5400.0 MINIMUM AND 10800.0 MAXIMUM
Reliability IndicatorNOT ESTABLISHED
Cubic Measure0.039 CUBIC INCHES
Actuator Travel Control FeatureSTOPS
Test Data Document73030-ED741501 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
Resistance Tolerance Per Section in Percent-5.0 TO 5.0 SINGLE SECTION
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
ED741501-501 Bourns Inc (USA)
ED741501-501 PRIMARY Hamilton Sundstrand Corporation Dba Collins Aerospace (USA)
ED741501-501 Techno Components Corp Dba Techno Components (USA)
Reference documents
ReferenceMeaning
ED741501-501 5/2 Secondary reference
U.S. Government activity
ED741501-501 5/2 Secondary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5905 — Resistor
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5905-00-000-0136
RESISTOR NETWORK,FIXED,FILM
5905-00-000-0488
5905-00-000-0488 · Item name not on file
5905-00-000-8809
5905-00-000-8809 · Item name not on file
5905-00-000-8833
5905-00-000-8833 · Item name not on file
5905-00-000-9526
5905-00-000-9526 · Item name not on file
5905-00-001-1342
5905-00-001-1342 · Item name not on file
5905-00-001-1573
5905-00-001-1573 · Item name not on file
5905-00-001-2059
5905-00-001-2059 · Item name not on file

Frequently Asked Questions

What is NSN 5905-01-212-5435?

NSN 5905-01-212-5435 is a Resistor,variable,wire Wound,pre, manufactured by Hamilton Sundstrand Corporation Dba Collins Aerospace, classified under FSC 5905, Resistor. Status: active.

What part numbers are listed for NSN 5905-01-212-5435?

NSN 5905-01-212-5435 has 3 manufacturer part numbers on file: ED741501-501 (Bourns Inc), ED741501-501 (Hamilton Sundstrand Corporation Dba Collins Aerospace), ED741501-501 (Techno Components Corp Dba Techno Components).

What are the specifications of ED741501-501?

Key specifications for ED741501-501: Maximum Running Torque: 5.00 INCH-OUNCES IN; Electrical Resistance Per Section: 500.0 OHMS SINGLE SECTION; Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 150.0 SINGLE SECTION; Section Quantity: 1. 30 specifications are documented in the U.S. Government catalog.

Is NSN 5905-01-212-5435 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com