PartsTable TECHNICAL DATA SHEET
NSN 5905-01-203-6611Government record, cited

Resistor, Variable, Wire Wound, Non5905-01-203-6611

NSN 5905-01-203-6611 · NIIN 012036611 · Part number E-T-3-1000
Ohmite Holding, L.l.c. Dba Ohmite Manufacturing · FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components · CAGE 44655
Government record, cited
NSN 5905-01-203-6611 — this item is cataloged by the U.S. Government under National Stock Number 5905-01-203-6611. Manufacturer of record part number: E-T-3-1000.
Also searched as  5905-01-203-6611 · 5905012036611 · NIIN 012036611 · 01-203-6611 · FSC 5905 Resistor · CAGE 44655 · E-T-3-1000 · G-929
Nearby stock numbers  ·
Features
  • Resistor,variable,wire Wound,non — FSC 5905
  • Maximum Running Torque: 6.00 INCH-OUNCES IN
  • Nonturn Device Location: AT 9 OCLOCK
  • Body Diameter: 0.875 INCHES NOMINAL IN
  • Screw Thread Quantity Per Inch: 32.0
  • Electrical Resistance Per Section: 1.0 KILOHMS ALL SECTIONS
  • Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 340.0 ALL SECTIONS
  • Section Quantity: 3
Identification
  • NSN: 5905-01-203-6611
  • NIIN: 012036611
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: E-T-3-1000
  • Manufacturer: Ohmite Holding, L.l.c. Dba Ohmite Manufacturing
General Description

The Resistor,variable,wire Wound,non, cataloged under National Stock Number 5905-01-203-6611, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Ohmite Holding, L.l.c. Dba Ohmite Manufacturing. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-01-203-6611
Primary Part NumberE-T-3-1000
Item NameResistor,variable,wire Wound,non
FSC / FSG5905 / 59 — Resistor
ManufacturerOhmite Holding, L.l.c. Dba Ohmite Manufacturing
StatusACTIVE
Maximum Running Torque6.00 INCH-OUNCES IN
Nonturn Device LocationAT 9 OCLOCK
Body Diameter0.875 INCHES NOMINAL IN
Screw Thread Quantity Per Inch32.0
Electrical Resistance Per Section1.0 KILOHMS ALL SECTIONS
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power340.0 ALL SECTIONS
Section Quantity3
Shaft Diameter0.125 INCHES NOMINAL IN
Nonturn Device Radius0.250 INCHES NOMINAL IN
Body StyleCYLINDRICAL BUSHING MOUNTED
Overall Diameter1.375 INCHES NOMINAL IN
First Flat Length0.562 INCHES NOMINAL IN
Mounting MethodSTANDARD BUSHING
Maximum Starting Torque6.00 INCH-OUNCES IN
Temp Coefficient of Resistance Wire Per Section in Ppm Per Deg Celsius-20.0 TO 20.0 ALL SECTIONS
Terminal LocationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
Shaft StyleROUND, FLATTED
Actuator TypeSINGLE SHAFT
Shaft Length0.875 INCHES NOMINAL IN
Body Length3.000 INCHES NOMINAL IN
Power Dissipation Rating Per Section in Watts12.5 FREE AIR ALL SECTIONS
Effective Electrical Rotation in Deg Angular Rotation300.0 NOMINAL
Screw Thread Diameter0.250 INCHES NOMINAL IN
Bearing TypeSLEEVE SHAFT
Reliability IndicatorNOT ESTABLISHED
Screw Thread Series DesignatorUNEF
Actuator Travel Control FeatureSTOPS
Resistance Tolerance Per Section in Percent-10.0 TO 10.0 ALL SECTIONS
Terminal Type and Quantity9 TAB, SOLDER LUG
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
7690-01-641-3810G-929 POSSIBLE MATCH
LABEL
Possible match (shared part number)Webb Research Corp.
Cross-Reference Index
Part NumberManufacturer
E-T-3-1000 Ohmite Holding, L.l.c. Dba Ohmite Manufacturing (USA)
Reference documents
ReferenceMeaning
G-929 3/9 Design control — primary reference
L3 Technologies, Inc.
Related Parts
7690-01-641-3810POSSIBLE MATCH
LABEL
G-929

Frequently Asked Questions

What is NSN 5905-01-203-6611?

NSN 5905-01-203-6611 is a Resistor,variable,wire Wound,non, manufactured by Ohmite Holding, L.l.c. Dba Ohmite Manufacturing, classified under FSC 5905, Resistor. Status: active.

What part numbers are listed for NSN 5905-01-203-6611?

NSN 5905-01-203-6611 has 1 manufacturer part number on file: E-T-3-1000 (Ohmite Holding, L.l.c. Dba Ohmite Manufacturing).

What NSN replaces 5905-01-203-6611?

1 possible match (shared part number, not a government interchangeability claim): 7690-01-641-3810. Verify interchangeability with system specifications before substitution.

What are the specifications of E-T-3-1000?

Key specifications for E-T-3-1000: Maximum Running Torque: 6.00 INCH-OUNCES IN; Nonturn Device Location: AT 9 OCLOCK; Body Diameter: 0.875 INCHES NOMINAL IN; Screw Thread Quantity Per Inch: 32.0. 29 specifications are documented in the U.S. Government catalog.

Is NSN 5905-01-203-6611 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com