PartsTable TECHNICAL DATA SHEET
NSN 5905-01-170-1585Government record, cited

Resistor, Variable, Nonwire Wound,5905-01-170-1585

NSN 5905-01-170-1585 · NIIN 011701585 · Part number G166006
Raytheon Company Dba Raytheon Co · FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components · CAGE 3B150
Government record, cited
NSN 5905-01-170-1585 — this item is cataloged by the U.S. Government under National Stock Number 5905-01-170-1585. Manufacturer of record part number: G166006.
Also searched as  5905-01-170-1585 · 5905011701585 · NIIN 011701585 · 01-170-1585 · FSC 5905 Resistor · CAGE 3B150 · G166006 · CM44030-382X · G166006-1 · CM44030-392X
Nearby stock numbers  ·
Features
  • Resistor,variable,nonwire Wound, — FSC 5905
  • Maximum Running Torque: 6.00 INCH-OUNCES IN
  • Body Diameter: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
  • Screw Thread Quantity Per Inch: 32.0
  • Electrical Resistance Per Section: 1.000 KILOHMS SINGLE SECTION
  • Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 120.0 SINGLE SECTION
  • Section Quantity: 1
  • Shaft Diameter: 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
Identification
  • NSN: 5905-01-170-1585
  • NIIN: 011701585
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: G166006
  • Manufacturer: Raytheon Company Dba Raytheon Co
General Description

The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-01-170-1585, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Raytheon Company Dba Raytheon Co. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-01-170-1585
Primary Part NumberG166006
Item NameResistor,variable,nonwire Wound,
FSC / FSG5905 / 59 — Resistor
ManufacturerRaytheon Company Dba Raytheon Co
StatusACTIVE
Maximum Running Torque6.00 INCH-OUNCES IN
Body Diameter0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
Screw Thread Quantity Per Inch32.0
Electrical Resistance Per Section1.000 KILOHMS SINGLE SECTION
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power120.0 SINGLE SECTION
Section Quantity1
Shaft Diameter0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
Nonturn Device Radius0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
Body StyleCYLINDRICAL BUSHING MOUNTED
Mounting MethodSTANDARD BUSHING
Maximum Starting Torque6.00 INCH-OUNCES IN
Terminal LocationREAR END
Features ProvidedPANEL SEAL AND SHAFT SEAL
Shaft StyleROUND, SLOTTED
Actuator TypeSINGLE SHAFT
Shaft Length0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN
Body Length0.438 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
Maximum Stop Torque48.00 INCH-OUNCES IN
Power Dissipation Rating Per Section in Watts0.5 FREE AIR SINGLE SECTION
Effective Electrical Rotation in Deg Angular Rotation295.0 NOMINAL
Screw Thread Diameter0.250 INCHES NOMINAL IN
Reliability IndicatorNOT ESTABLISHED
Screw Thread Series DesignatorUNEF
Actuator Travel Control FeatureSTOPS
Resistance Temp Characteristic Range Per Section in Percent-3.0 TO 0.0 -55 DEG CELSIUS SINGLE SECTION AND -5.0 TO 10.0 -25 DEG CELSIUS SINGLE SECTION AND -5.0 TO 10.0 25 DEG CELSIUS SINGLE SECTION AND +0.0 TO 3.0 120 DEG CELSIUS SINGLE SECTION
Test Data Document49956-G166006 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
Resistance Tolerance Per Section in Percent-10.0 TO 10.0 SINGLE SECTION
Terminal Type and Quantity3 WIRE LOOP
Rotary Actuator Travel in Angular Deg295.0 NOMINAL
Mounting Bushing Length0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
G166006 Raytheon Company (USA)
G166006 PRIMARY Raytheon Company Dba Raytheon Co (USA)
Reference documents
ReferenceMeaning
CM44030-382X 5/9 Secondary reference
Clarostat Sensors and Controls
G166006-1 C/1 Advisory reference — outside the item-of-supply concept
Raytheon Company Div Corp
CM44030-392X 5/9 Secondary reference
Clarostat Sensors and Controls
G166006 5/9 Secondary reference
Raytheon Company Div Corp
No interchangeability data on file.
Other items in FSC 5905 — Resistor
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5905-00-000-0136
RESISTOR NETWORK,FIXED,FILM
5905-00-000-0488
5905-00-000-0488 · Item name not on file
5905-00-000-8809
5905-00-000-8809 · Item name not on file
5905-00-000-8833
5905-00-000-8833 · Item name not on file
5905-00-000-9526
5905-00-000-9526 · Item name not on file
5905-00-001-1342
5905-00-001-1342 · Item name not on file
5905-00-001-1573
5905-00-001-1573 · Item name not on file
5905-00-001-2059
5905-00-001-2059 · Item name not on file

Frequently Asked Questions

What is NSN 5905-01-170-1585?

NSN 5905-01-170-1585 is a Resistor,variable,nonwire Wound,, manufactured by Raytheon Company Dba Raytheon Co, classified under FSC 5905, Resistor. Status: active.

What part numbers are listed for NSN 5905-01-170-1585?

NSN 5905-01-170-1585 has 2 manufacturer part numbers on file: G166006 (Raytheon Company), G166006 (Raytheon Company Dba Raytheon Co).

What are the specifications of G166006?

Key specifications for G166006: Maximum Running Torque: 6.00 INCH-OUNCES IN; Body Diameter: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN; Screw Thread Quantity Per Inch: 32.0; Electrical Resistance Per Section: 1.000 KILOHMS SINGLE SECTION. 30 specifications are documented in the U.S. Government catalog.

Is NSN 5905-01-170-1585 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com