PartsTable TECHNICAL DATA SHEET
NSN 5905-01-143-5020Government record, cited

Resistor, Variable, Wire Wound, Pre5905-01-143-5020

NSN 5905-01-143-5020 · NIIN 011435020 · Part number L03216
Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) · FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components · CAGE 16236
Government record, cited
NSN 5905-01-143-5020 — this item is cataloged by the U.S. Government under National Stock Number 5905-01-143-5020. Manufacturer of record part number: L03216.
Also searched as  5905-01-143-5020 · 5905011435020 · NIIN 011435020 · 01-143-5020 · FSC 5905 Resistor · CAGE 16236 · L03216 · 120814-4 · 120814-4
Nearby stock numbers  ·
Features
  • Resistor,variable,wire Wound,pre — FSC 5905
  • Maximum Running Torque: 3.00 INCH-OUNCES IN
  • Nonturn Device Location: AT 6 OCLOCK
  • Body Diameter: 1.812 INCHES NOMINAL IN
  • Screw Thread Quantity Per Inch: 32.0
  • Lateral Runout: 0.003 INCHES IN
  • Electrical Resistance Per Section: 2.0 KILOHMS SINGLE SECTION
  • Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 85.0 SINGLE SECTION
Identification
  • NSN: 5905-01-143-5020
  • NIIN: 011435020
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: L03216
  • Manufacturer: Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)
General Description

The Resistor,variable,wire Wound,pre, cataloged under National Stock Number 5905-01-143-5020, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings). Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-01-143-5020
Primary Part NumberL03216
Item NameResistor,variable,wire Wound,pre
FSC / FSG5905 / 59 — Resistor
ManufacturerDla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)
StatusACTIVE
Maximum Running Torque3.00 INCH-OUNCES IN
Nonturn Device LocationAT 6 OCLOCK
Body Diameter1.812 INCHES NOMINAL IN
Screw Thread Quantity Per Inch32.0
Lateral Runout0.003 INCHES IN
Electrical Resistance Per Section2.0 KILOHMS SINGLE SECTION
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power85.0 SINGLE SECTION
Section Quantity1
Shaft Diameter0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM IN
Nonturn Device Radius0.562 INCHES NOMINAL IN
Function Characteristic Per SectionSINGLE SECTION LINEAR
Body StyleCYLINDRICAL BUSHING MOUNTED
Function Conformity Tolerance Per Section-0.25 TO 0.25 SINGLE SECTION
Shaft End Play0.005 INCHES IN
Mounting MethodSTANDARD BUSHING
Criticality Code JustificationZZZY
Maximum Starting Torque3.00 INCH-OUNCES IN
Temp Coefficient of Resistance Wire Per Section in Ppm Per Deg Celsius-20.0 TO 20.0 SINGLE SECTION
Terminal LocationLONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
Features ProvidedHUMIDITY PROOF
Shaft StyleROUND
Actuator TypeSINGLE SHAFT
Shaft Length0.938 INCHES NOMINAL IN
Body Length2.000 INCHES NOMINAL IN
Maximum Stop Torque550.00 INCH-OUNCES IN
Shaft Runout0.0005 INCHES IN
Power Dissipation Rating Per Section in Watts5.0 FREE AIR SINGLE SECTION
Effective Electrical Rotation in Deg Angular Rotation3600.0 MINIMUM AND 3604.0 MAXIMUM
Pilot Diameter Runout0.002 INCHES IN
Screw Thread Diameter0.375 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeS
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5306-01-673-46621208144 POSSIBLE MATCH
BOLT,INTERNAL WRENCHING
Possible match (shared part number)Bossard Intl Inc
Cross-Reference Index
Part NumberManufacturer
L03216 Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) (USA)
Reference documents
ReferenceMeaning
120814-4 3/9 Design control — primary reference
Vamistor/weston Div of Vamistor Corp of Tennessee Inc
120814-4 5/9 Secondary reference
U.S. Government activity
Related Parts
5306-01-673-4662POSSIBLE MATCH
BOLT,INTERNAL WRENCHING
1208144

Frequently Asked Questions

What is NSN 5905-01-143-5020?

NSN 5905-01-143-5020 is a Resistor,variable,wire Wound,pre, manufactured by Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings), classified under FSC 5905, Resistor. Status: active.

What part numbers are listed for NSN 5905-01-143-5020?

NSN 5905-01-143-5020 has 1 manufacturer part number on file: L03216 (Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)).

What NSN replaces 5905-01-143-5020?

1 possible match (shared part number, not a government interchangeability claim): 5306-01-673-4662. Verify interchangeability with system specifications before substitution.

What are the specifications of L03216?

Key specifications for L03216: Maximum Running Torque: 3.00 INCH-OUNCES IN; Nonturn Device Location: AT 6 OCLOCK; Body Diameter: 1.812 INCHES NOMINAL IN; Screw Thread Quantity Per Inch: 32.0. 30 specifications are documented in the U.S. Government catalog.

Is NSN 5905-01-143-5020 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com