PartsTable TECHNICAL DATA SHEET
NSN 5905-01-112-5372Government record, cited

Resistor, Variable, Nonwire Wound,5905-01-112-5372

NSN 5905-01-112-5372 · NIIN 011125372
FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5905-01-112-5372 · 5905011125372 · NIIN 011125372 · 01-112-5372 · FSC 5905 Resistor · RJR50FP501P · MIL-PRF-39035/4 · RJR50FP501M · RJ50FW501 · MIL-R-39035/4
Nearby stock numbers  ·
Features
  • Resistor,variable,nonwire Wound, — FSC 5905
  • Maximum Running Torque: 2.00 INCH-OUNCES IN
  • Electrical Resistance Per Section: 500.0 OHMS SINGLE SECTION
  • Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 150.0 SINGLE SECTION
  • Section Quantity: 1
  • Body Style: RECTANGULAR
  • Terminal Length: 0.172 INCHES MINIMUM IN
  • Mounting Method: TERMINAL
Identification
  • NSN: 5905-01-112-5372
  • NIIN: 011125372
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-01-112-5372, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. Government technical data includes 27 specifications, cited from the U.S. Government catalog. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 5 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-01-112-5372
Item NameResistor,variable,nonwire Wound,
FSC / FSG5905 / 59 — Resistor
StatusACTIVE
Maximum Running Torque2.00 INCH-OUNCES IN
Electrical Resistance Per Section500.0 OHMS SINGLE SECTION
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power150.0 SINGLE SECTION
Section Quantity1
Body StyleRECTANGULAR
Terminal Length0.172 INCHES MINIMUM IN
Mounting MethodTERMINAL
Body Width0.250 INCHES NOMINAL IN
Body Height0.250 INCHES NOMINAL IN
Maximum Starting Torque2.00 INCH-OUNCES IN
Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius-100.0 TO 100.0 SINGLE SECTION
Terminal LocationREAR END
Reliability Failure Rate Level in Percent0.100
Center to Center Distance Between Center Terminal and Outside Terminal0.100 INCHES NOMINAL IN
Features ProvidedHUMIDITY PROOF
Actuator TypeFLUSH DRIVE WITH SLOT-HOLE
Specification/standard Data81349-MIL-R-39035/4 GOVERNMENT SPECIFICATION
Body Length0.250 INCHES MAXIMUM IN
Maximum Stop Torque64.00 INCH-OUNCES IN
Center to Center Distance Between Terminals0.200 INCHES NOMINAL IN
Power Dissipation Rating Per Section in Watts0.25 FREE AIR SINGLE SECTION
Effective Electrical Rotation in Deg Angular Rotation215.0 MINIMUM
Reliability IndicatorESTABLISHED
Actuator Travel Control FeatureSTOPS
Test Data Document81349-MIL-R-39035 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Resistance Tolerance Per Section in Percent-10.0 TO 10.0 SINGLE SECTION
Terminal Type and Quantity3 PIN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 5
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5905-01-113-2856 POSSIBLE MATCH
RESISTOR,VARIABLE,NONWIRE WOUND,
Possible match (shared part number)
5905-01-115-7182 POSSIBLE MATCH
RESISTOR,VARIABLE,NONWIRE WOUND,
Possible match (shared part number)
5905-01-121-1130 POSSIBLE MATCH
RESISTOR,VARIABLE,NONWIRE WOUND,
Possible match (shared part number)
5905-01-134-2705 POSSIBLE MATCH
RESISTOR,VARIABLE,NONWIRE WOUND,
Possible match (shared part number)
5905-01-180-794711258-006 POSSIBLE MATCH
RESISTOR
Possible match (shared part number)Dynalec Corporation
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
RJR50FP501P 2/2 Government specification standardization
U.S. Government activity
MIL-PRF-39035/4 4/1 Identification reference
U.S. Government activity
RJR50FP501M 5/9 Secondary reference
U.S. Government activity
RJ50FW501 C/1 Advisory reference — outside the item-of-supply concept
U.S. Government activity
MIL-R-39035/4 5/9 Secondary reference
U.S. Government activity
Related Parts
5905-01-113-2856POSSIBLE MATCH
RESISTOR,VARIABLE,NONWIRE WOUND,
5905-01-115-7182POSSIBLE MATCH
RESISTOR,VARIABLE,NONWIRE WOUND,
5905-01-121-1130POSSIBLE MATCH
RESISTOR,VARIABLE,NONWIRE WOUND,
5905-01-134-2705POSSIBLE MATCH
RESISTOR,VARIABLE,NONWIRE WOUND,
5905-01-180-7947POSSIBLE MATCH
RESISTOR
11258-006

Frequently Asked Questions

What is NSN 5905-01-112-5372?

NSN 5905-01-112-5372 is a Resistor,variable,nonwire Wound,, classified under FSC 5905, Resistor. Status: active.

What NSN replaces 5905-01-112-5372?

5 possible matches (shared part number, not a government interchangeability claim): 5905-01-113-2856, 5905-01-115-7182, 5905-01-121-1130. Verify interchangeability with system specifications before substitution.

What are the specifications of 5905-01-112-5372?

Key specifications for 5905-01-112-5372: Maximum Running Torque: 2.00 INCH-OUNCES IN; Overall Height: 0.250 INCHES NOMINAL IN; Electrical Resistance Per Section: 500.0 OHMS SINGLE SECTION; Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 150.0 SINGLE SECTION. 27 specifications are documented in the U.S. Government catalog.

Is NSN 5905-01-112-5372 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com