The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-01-107-0807, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. Government technical data includes 30 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-01-107-0807 |
| Item Name | Resistor,variable,nonwire Wound, |
| FSC / FSG | 5905 / 59 — Resistor |
| Status | ACTIVE |
| Maximum Running Torque | 6.00 INCH-OUNCES IN |
| Body Diameter | 0.500 INCHES NOMINAL IN |
| Screw Thread Quantity Per Inch | 32.0 |
| Electrical Resistance Per Section | 5.0 KILOHMS SINGLE SECTION |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 120.0 SINGLE SECTION |
| Section Quantity | 1 |
| Shaft Diameter | 0.125 INCHES NOMINAL IN |
| Nonturn Device Radius | 0.245 INCHES NOMINAL IN |
| Fragility Factor | RUGGED |
| Body Style | CYLINDRICAL BUSHING MOUNTED |
| Mounting Method | SHAFT |
| Maximum Starting Torque | 6.00 INCH-OUNCES IN |
| Terminal Location | REAR END |
| Features Provided | PANEL SEAL |
| Shaft Style | ROUND, SLOTTED |
| Actuator Type | SINGLE SHAFT |
| Shaft Length | 0.625 INCHES NOMINAL IN |
| Specification/standard Data | 81349-MIL-R-94/3 GOVERNMENT SPECIFICATION |
| Body Length | 0.531 INCHES NOMINAL IN |
| Maximum Stop Torque | 48.00 INCH-OUNCES IN |
| Power Dissipation Rating Per Section in Watts | 0.25 FREE AIR SINGLE SECTION |
| Screw Thread Diameter | 0.250 INCHES NOMINAL IN |
| Reliability Indicator | NOT ESTABLISHED |
| Screw Thread Series Designator | UNEF |
| Actuator Travel Control Feature | STOPS |
| Resistance Temp Characteristic Range Per Section in Percent | -3.0 TO 0.0 -55 DEG CELSIUS SINGLE SECTION AND -5.0 TO 10.0 -25 DEG CELSIUS SINGLE SECTION AND -5.0 TO 10.0 25 DEG CELSIUS SINGLE SECTION AND +0.0 TO 3.0 120 DEG CELSIUS SINGLE SECTION |
| Test Data Document | 81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Resistance Tolerance Per Section in Percent | -10.0 TO 10.0 SINGLE SECTION |
| Terminal Type and Quantity | 3 TAB, SOLDER LUG |
| Rotary Actuator Travel in Angular Deg | 292.0 MINIMUM AND 298.0 MAXIMUM |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| RV6SAYSA502C | 2/2 Government specification standardization U.S. Government activity |
| MIL-PRF-94/3 | 4/1 Identification reference U.S. Government activity |
| MIL-R-94/3 | 5/9 Secondary reference U.S. Government activity |
NSN 5905-01-107-0807 is a Resistor,variable,nonwire Wound,, classified under FSC 5905, Resistor. Status: active.
Key specifications for 5905-01-107-0807: Maximum Running Torque: 6.00 INCH-OUNCES IN; Body Diameter: 0.500 INCHES NOMINAL IN; Screw Thread Quantity Per Inch: 32.0; Electrical Resistance Per Section: 5.0 KILOHMS SINGLE SECTION. 30 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.