PartsTable TECHNICAL DATA SHEET
NSN 5905-01-100-6603Government record, cited

Resistor, Variable, Nonwire Wound,5905-01-100-6603

NSN 5905-01-100-6603 · NIIN 011006603 · Part number JJC97730A
Clarostat Sensors and Controls · FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components · CAGE 12697
Government record, cited
NSN 5905-01-100-6603 — this item is cataloged by the U.S. Government under National Stock Number 5905-01-100-6603. Manufacturer of record part number: JJC97730A.
Also searched as  5905-01-100-6603 · 5905011006603 · NIIN 011006603 · 01-100-6603 · FSC 5905 Resistor · CAGE 12697 · JJC97730A · JC97730A · 960038-1C · 97730
Nearby stock numbers  ·
Features
  • Resistor,variable,nonwire Wound, — FSC 5905
  • Maximum Running Torque: 6.00 INCH-OUNCES IN
  • Body Diameter: 1.156 INCHES MAXIMUM IN
  • Screw Thread Quantity Per Inch: 32.0
  • Undercut Length: 0.625 INCHES NOMINAL IN
  • Electrical Resistance Per Section: 100.000 KILOHMS 1ST SECTION AND 10.000 KILOHMS 2ND SECTION
  • Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 120.0 SINGLE SECTION
  • Section Quantity: 2
Identification
  • NSN: 5905-01-100-6603
  • NIIN: 011006603
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: JJC97730A
  • Manufacturer: Clarostat Sensors and Controls
General Description

The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-01-100-6603, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Clarostat Sensors and Controls. Government technical data includes 28 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-01-100-6603
Primary Part NumberJJC97730A
Item NameResistor,variable,nonwire Wound,
FSC / FSG5905 / 59 — Resistor
ManufacturerClarostat Sensors and Controls
StatusACTIVE
Maximum Running Torque6.00 INCH-OUNCES IN
Body Diameter1.156 INCHES MAXIMUM IN
Screw Thread Quantity Per Inch32.0
Undercut Length0.625 INCHES NOMINAL IN
Electrical Resistance Per Section100.000 KILOHMS 1ST SECTION AND 10.000 KILOHMS 2ND SECTION
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power120.0 SINGLE SECTION
Section Quantity2
Shaft Diameter0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
Undercut Diameter0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
Nonturn Device Radius0.531 INCHES NOMINAL IN
Body StyleCYLINDRICAL BUSHING MOUNTED
Overall Diameter1.812 INCHES MAXIMUM IN
Mounting MethodSTANDARD BUSHING
Maximum Starting Torque6.00 INCH-OUNCES IN
Terminal LocationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
Shaft StyleROUND, STEPPED
Actuator TypeDUAL CONCENTRIC
Shaft Length1.375 INCHES NOMINAL IN
Body Length1.312 INCHES MAXIMUM IN
Maximum Stop Torque192.00 INCH-OUNCES IN
Power Dissipation Rating Per Section in Watts2.25 FREE AIR ALL SECTIONS
Effective Electrical Rotation in Deg Angular Rotation309.0 MINIMUM AND 315.0 MAXIMUM
Screw Thread Diameter0.375 INCHES NOMINAL IN
Reliability IndicatorNOT ESTABLISHED
Screw Thread Series DesignatorUNEF
Mechanical Backlash in Deg Angular Rotation3.0
Cubic Measure1.377 CUBIC INCHES
Actuator Travel Control FeatureSTOPS
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
JJC97730A Clarostat Sensors and Controls (USA)
Reference documents
ReferenceMeaning
JJC97730A 5/9 Secondary reference
Rockwell Automation, Inc. Dba Rockwell Automation
JC97730A 5/9 Secondary reference
Rockwell Automation, Inc. Dba Rockwell Automation
960038-1C 3/2 Design control — primary reference
U.S. Government activity
97730 5/9 Secondary reference
Rockwell Automation, Inc. Dba Rockwell Automation

Frequently Asked Questions

What is NSN 5905-01-100-6603?

NSN 5905-01-100-6603 is a Resistor,variable,nonwire Wound,, manufactured by Clarostat Sensors and Controls, classified under FSC 5905, Resistor. Status: active.

What part numbers are listed for NSN 5905-01-100-6603?

NSN 5905-01-100-6603 has 1 manufacturer part number on file: JJC97730A (Clarostat Sensors and Controls).

What are the specifications of JJC97730A?

Key specifications for JJC97730A: Maximum Running Torque: 6.00 INCH-OUNCES IN; Body Diameter: 1.156 INCHES MAXIMUM IN; Screw Thread Quantity Per Inch: 32.0; Undercut Length: 0.625 INCHES NOMINAL IN. 28 specifications are documented in the U.S. Government catalog.

Is NSN 5905-01-100-6603 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com