The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-01-073-1907, is classified within Federal Supply Class 5905 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Clarostat Sensors and Controls. Government technical data includes 21 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 4 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-01-073-1907 |
| Primary Part Number | GH8062 |
| Item Name | Resistor,variable,nonwire Wound, |
| FSC / FSG | 5905 / 59 — No Item Name Available |
| Manufacturer | Clarostat Sensors and Controls |
| Status | ACTIVE |
| First Flat Length | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN |
| Body Diameter | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN |
| Body Length | 0.613 INCHES MINIMUM AND 0.623 INCHES MAXIMUM IN |
| Shaft Style | ROUND, FLATTED |
| Actuator Type | SINGLE SHAFT |
| Electrical Resistance Per Section | 2.500 KILOHMS SINGLE SECTION |
| Power Dissipation Rating Per Section in Watts | 0.5 FREE AIR SINGLE SECTION |
| Terminal Location | REAR-BOTTOM |
| Mounting Bushing Length | 0.370 INCHES MINIMUM AND 0.402 INCHES MAXIMUM IN |
| Mounting Method | LOCKING BUSHING |
| Screw Thread Diameter | 0.250 INCHES NOMINAL IN |
| Screw Thread Series Designator | UNEF |
| Reliability Indicator | NOT ESTABLISHED |
| Section Quantity | 1 |
| Resistance Tolerance Per Section in Percent | -10.0 TO 10.0 SINGLE SECTION |
| Terminal Type and Quantity | 5 TAB, SOLDER LUG |
| Flat Height | 0.092 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN |
| Screw Thread Quantity Per Inch | 32.0 |
| Shaft Length | 0.335 INCHES MINIMUM AND 0.345 INCHES MAXIMUM IN |
| Body Style | CYLINDRICAL BUSHING MOUNTED |
| Shaft Diameter | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 11743552 | Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate (USA) |
| 8062 | Rockwell Automation, Inc. Dba Rockwell Automation (USA) |
| GH8062 PRIMARY | Clarostat Sensors and Controls (USA) |
| GH8062 | Rockwell Automation, Inc. Dba Rockwell Automation (USA) |
NSN 5905-01-073-1907 is a Resistor,variable,nonwire Wound,, manufactured by Clarostat Sensors and Controls, classified under FSC 5905 (No Item Name Available). Status: active.
NSN 5905-01-073-1907 has 4 cross-referenced part numbers: 11743552 (Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate), 8062 (Rockwell Automation, Inc. Dba Rockwell Automation), GH8062 (Clarostat Sensors and Controls), GH8062 (Rockwell Automation, Inc. Dba Rockwell Automation).
There are 12 known substitutes for 5905-01-073-1907: 5998-00-105-0872, 5935-00-185-5136, 5325-00-202-1500 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for GH8062: First Flat Length: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN; Body Diameter: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN; Body Length: 0.613 INCHES MINIMUM AND 0.623 INCHES MAXIMUM IN; Shaft Style: ROUND, FLATTED. 22 total characteristics are documented in the Federal Logistics Information System.