The Resistor,variable,wire Wound,pre, cataloged under National Stock Number 5905-01-059-5410, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. Government technical data includes 30 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-01-059-5410 |
| Item Name | Resistor,variable,wire Wound,pre |
| FSC / FSG | 5905 / 59 — Resistor |
| Status | ACTIVE |
| Body Diameter | 2.000 INCHES NOMINAL IN |
| Lateral Runout | 0.003 INCHES IN |
| Electrical Resistance Per Section | 200.000 OHMS 1ST SECTION AND 1.000 KILOHMS 2ND SECTION |
| Mounting Lip Depth | 0.09300 INCHES NOMINAL IN |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 125.0 ALL SECTIONS |
| Undercut Width | 0.08300 INCHES NOMINAL IN |
| Section Quantity | 2 |
| Shaft Diameter | 0.2497 INCHES MAXIMUM IN |
| Undercut Diameter | 1.875 INCHES MAXIMUM IN |
| Function Characteristic Per Section | ALL SECTIONS LINEAR |
| Body Style | CYLINDRICAL SERVO MOUNTED |
| Function Conformity Tolerance Per Section | -0.30 TO 0.30 1ST SECTION AND -0.20 TO 0.20 2ND SECTION |
| Shaft End Play | 0.00300 INCHES IN |
| Mounting Method | CLAMP RING(S) |
| Temp Coefficient of Resistance Wire Per Section in Ppm Per Deg Celsius | -20.0 TO 20.0 ALL SECTIONS |
| Terminal Location | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED |
| Mounting Lip Diameter | 2.00000 INCHES NOMINAL IN |
| Shaft Style | ROUND |
| Actuator Type | SINGLE SHAFT |
| Shaft Length | 0.625 INCHES NOMINAL IN |
| Pilot Diameter | 1.87500 INCHES NOMINAL IN |
| Body Length | 1.326 INCHES NOMINAL IN |
| Shaft Runout | 0.001 INCHES IN |
| Pilot Length | 0.06200 INCHES NOMINAL IN |
| Power Dissipation Rating Per Section in Watts | 4.0 FREE AIR ALL SECTIONS |
| Effective Electrical Rotation in Deg Angular Rotation | 350.0 NOMINAL |
| Pilot Diameter Runout | 0.00200 INCHES IN |
| Bearing Type | BALL SHAFT |
| Reliability Indicator | NOT ESTABLISHED |
| Shaft Radial Play | 0.0015 INCHES IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 3465S674-201-102 | 3/9 Design control — primary reference U.S. Government activity |
NSN 5905-01-059-5410 is a Resistor,variable,wire Wound,pre, classified under FSC 5905, Resistor. Status: active.
Key specifications for 5905-01-059-5410: Body Diameter: 2.000 INCHES NOMINAL IN; Lateral Runout: 0.003 INCHES IN; Electrical Resistance Per Section: 200.000 OHMS 1ST SECTION AND 1.000 KILOHMS 2ND SECTION; Mounting Lip Depth: 0.09300 INCHES NOMINAL IN. 30 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.