PartsTable TECHNICAL DATA SHEET
NSN 5905-01-058-7866Government record, cited

Resistor, Variable, Wire Wound, Non5905-01-058-7866

NSN 5905-01-058-7866 · NIIN 010587866
FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5905-01-058-7866 · 5905010587866 · NIIN 010587866 · 01-058-7866 · FSC 5905 Resistor · 7383858-PL708782-38 · 7550480-PL708782-38 · MIL-PRF-22/15 · RP051UB502KK · MIL-R-22/15
Nearby stock numbers  ·
Features
  • Resistor,variable,wire Wound,non — FSC 5905
  • Body Diameter: 0.525 INCHES MAXIMUM IN
  • Screw Thread Quantity Per Inch: 32.0
  • Electrical Resistance Per Section: 5.0 KILOHMS SINGLE SECTION
  • Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 340.0 SINGLE SECTION
  • Section Quantity: 1
  • Shaft Diameter: 0.125 INCHES NOMINAL IN
  • Fragility Factor: MODERATELY RUGGED
Identification
  • NSN: 5905-01-058-7866
  • NIIN: 010587866
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Resistor,variable,wire Wound,non, cataloged under National Stock Number 5905-01-058-7866, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. Government technical data includes 29 specifications, cited from the U.S. Government catalog. 8 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-01-058-7866
Item NameResistor,variable,wire Wound,non
FSC / FSG5905 / 59 — Resistor
StatusACTIVE
Body Diameter0.525 INCHES MAXIMUM IN
Screw Thread Quantity Per Inch32.0
Electrical Resistance Per Section5.0 KILOHMS SINGLE SECTION
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power340.0 SINGLE SECTION
Section Quantity1
Shaft Diameter0.125 INCHES NOMINAL IN
Fragility FactorMODERATELY RUGGED
Body StyleCYLINDRICAL BUSHING MOUNTED
Mounting MethodLOCKING BUSHING
Terminal LocationREAR END LOCATION NOT OTHERWISE SPECIFIED
Features ProvidedHUMIDITY PROOF AND SHAFT LOCKING DEVICE
Shaft StyleROUND, SLOTTED
Actuator TypeSINGLE SHAFT
Shaft Length0.625 INCHES NOMINAL IN
Specification/standard Data81349-MIL-R-22/15 GOVERNMENT SPECIFICATION
Body Length0.656 INCHES NOMINAL IN
Power Dissipation Rating Per Section in Watts5.0 FREE AIR SINGLE SECTION
Effective Electrical Rotation in Deg Angular Rotation300.0 NOMINAL
Screw Thread Diameter0.250 INCHES NOMINAL IN
Bearing TypeSLEEVE SHAFT
Reliability IndicatorNOT ESTABLISHED
Screw Thread Series DesignatorUNEF
Actuator Travel Control FeatureSTOPS
Test Data Document81349-MIL-R-22 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Resistance Tolerance Per Section in Percent-10.0 TO 10.0 SINGLE SECTION
Terminal Type and Quantity3 TAB, SOLDER LUG
Rotary Actuator Travel in Angular Deg300.0 NOMINAL
Mounting Bushing Length0.500 INCHES NOMINAL IN
Ambient Temp in Deg Celsius Per Section at Full Rated Power25.0 SINGLE SECTION
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
7383858-PL708782-38 5/1 Secondary reference
Naval Sea Systems Command
7550480-PL708782-38 5/1 Secondary reference
Naval Sea Systems Command
MIL-PRF-22/15 4/1 Identification reference
U.S. Government activity
RP051UB502KK 5/9 Secondary reference
U.S. Government activity
MIL-R-22/15 5/9 Secondary reference
U.S. Government activity
M22/15-00181UB 2/2 Government specification standardization
U.S. Government activity
M22-15-0018UB 5/9 Secondary reference
U.S. Government activity
538165-36 C/1 Advisory reference — outside the item-of-supply concept
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5905 — Resistor
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5905-00-000-0136
RESISTOR NETWORK,FIXED,FILM
5905-00-000-0488
5905-00-000-0488 · Item name not on file
5905-00-000-8809
5905-00-000-8809 · Item name not on file
5905-00-000-8833
5905-00-000-8833 · Item name not on file
5905-00-000-9526
5905-00-000-9526 · Item name not on file
5905-00-001-1342
5905-00-001-1342 · Item name not on file
5905-00-001-1573
5905-00-001-1573 · Item name not on file
5905-00-001-2059
5905-00-001-2059 · Item name not on file

Frequently Asked Questions

What is NSN 5905-01-058-7866?

NSN 5905-01-058-7866 is a Resistor,variable,wire Wound,non, classified under FSC 5905, Resistor. Status: active.

What are the specifications of 5905-01-058-7866?

Key specifications for 5905-01-058-7866: Body Diameter: 0.525 INCHES MAXIMUM IN; Screw Thread Quantity Per Inch: 32.0; Electrical Resistance Per Section: 5.0 KILOHMS SINGLE SECTION; Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 340.0 SINGLE SECTION. 29 specifications are documented in the U.S. Government catalog.

Is NSN 5905-01-058-7866 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com