The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-01-048-1115, is classified within Federal Supply Class 5905 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Hensoldt Sensors Gmbh. Government technical data includes 30 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 4 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-01-048-1115 |
| Primary Part Number | 5800583-153206-101 |
| Item Name | Resistor,variable,nonwire Wound, |
| FSC / FSG | 5905 / 59 — No Item Name Available |
| Manufacturer | Hensoldt Sensors Gmbh |
| Status | ACTIVE |
| Shaft Diameter | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN |
| Maximum Starting Torque | 6.00 INCH-OUNCES IN |
| Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius | -250.0 TO 250.0 SINGLE SECTION |
| Actuator Type | SINGLE SHAFT |
| Screw Thread Quantity Per Inch | 32.0 |
| Device Design Type | NONTURN AT 4:30 OCLOCKUNABLE TO DECODE |
| Specification/standard Data | 81349-MIL-R-23285/3 GOVERNMENT SPECIFICATION |
| Screw Thread Series Designator | UNEF |
| Nonturn Device Radius | 0.245 INCHES NOMINAL IN |
| Mounting Method | STANDARD BUSHING |
| Device Design Type | NONTURN AT 10:30 OCLOCKUNABLE TO DECODE |
| Resistance Tolerance Per Section in Percent | -10.0 TO 10.0 SINGLE SECTION |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 175.0 SINGLE SECTION |
| Electrical Resistance Per Section | 2.5 KILOHMS SINGLE SECTION |
| Actuator Travel Control Feature | STOPS |
| Power Dissipation Rating Per Section in Watts | 0.5 FREE AIR SINGLE SECTION |
| Rotary Actuator Travel in Angular Deg | 292.0 MINIMUM AND 298.0 MAXIMUM |
| Test Data Document | 81349-MIL-R-23285 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Screw Thread Diameter | 0.250 INCHES NOMINAL IN |
| Terminal Type and Quantity | 3 TAB, SOLDER LUG |
| Body Diameter | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN |
| Effective Electrical Rotation in Deg Angular Rotation | 292.0 MINIMUM AND 298.0 MAXIMUM |
| Body Length | 0.415 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN |
| Maximum Stop Torque | 48.00 INCH-OUNCES IN |
| Ambient Temp in Deg Celsius Per Section at Full Rated Power | 125.0 SINGLE SECTION |
| Reliability Indicator | NOT ESTABLISHED |
| Terminal Location | REAR END |
| Section Quantity | 1 |
| Shaft Length | 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN |
| Body Style | CYLINDRICAL BUSHING MOUNTED |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 5800583-153206-101 | Hensoldt Sensors Gmbh (DEU) |
| RVC6NYD252B | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 600-2-5KOHMPORT10PCT | Cts Corp (USA) |
| MIL-R-23285/3 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5905-01-048-1115 is a Resistor,variable,nonwire Wound,, manufactured by Hensoldt Sensors Gmbh, classified under FSC 5905 (No Item Name Available). Status: active.
NSN 5905-01-048-1115 has 4 cross-referenced part numbers: 5800583-153206-101 (Hensoldt Sensors Gmbh), RVC6NYD252B (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 600-2-5KOHMPORT10PCT (Cts Corp), MIL-R-23285/3 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There is 1 known substitute for 5905-01-048-1115: 5905-01-193-1898. Verify interchangeability with system specifications before substitution.
Key specifications for 5800583-153206-101: Shaft Diameter: 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN; Maximum Starting Torque: 6.00 INCH-OUNCES IN; Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius: -250.0 TO 250.0 SINGLE SECTION; Actuator Type: SINGLE SHAFT. 30 total characteristics are documented in the Federal Logistics Information System.