PartsTable TECHNICAL DATA SHEET
NSN 5905-01-043-7314Government record, cited

Resistor, Variable, Wire Wound, Non5905-01-043-7314

NSN 5905-01-043-7314 · NIIN 010437314
FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5905-01-043-7314 · 5905010437314 · NIIN 010437314 · 01-043-7314 · FSC 5905 Resistor · MIL-R-27208/9 · RT24C2W503P0RM5PCT · RT24C2W503 · MIL-PRF-27208/9
Nearby stock numbers  ·
Features
  • Resistor,variable,wire Wound,non — FSC 5905
  • Maximum Running Torque: 5.00 INCH-OUNCES IN
  • Electrical Resistance Per Section: 50.000 KILOHMS SINGLE SECTION
  • Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 150.0 SINGLE SECTION
  • Section Quantity: 1
  • Shaft Diameter: 0.075 INCHES NOMINAL IN
  • Body Style: RECTANGULAR
  • Terminal Length: 0.172 INCHES MINIMUM IN
Identification
  • NSN: 5905-01-043-7314
  • NIIN: 010437314
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Resistor,variable,wire Wound,non, cataloged under National Stock Number 5905-01-043-7314, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. Government technical data includes 27 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 3 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-01-043-7314
Item NameResistor,variable,wire Wound,non
FSC / FSG5905 / 59 — Resistor
StatusACTIVE
Maximum Running Torque5.00 INCH-OUNCES IN
Electrical Resistance Per Section50.000 KILOHMS SINGLE SECTION
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power150.0 SINGLE SECTION
Section Quantity1
Shaft Diameter0.075 INCHES NOMINAL IN
Body StyleRECTANGULAR
Terminal Length0.172 INCHES MINIMUM IN
Mounting MethodTERMINAL
Body Width0.190 INCHES NOMINAL IN
Body Height0.375 INCHES NOMINAL IN
Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius-50.0 TO 50.0 SINGLE SECTION
Terminal LocationREAR END LOCATION NOT OTHERWISE SPECIFIED
Center to Center Distance Between Center Terminal and Outside Terminal0.100 INCHES NOMINAL IN
Shaft StyleROUND, SLOTTED
Actuator TypeSINGLE SHAFT
Body Length0.420 INCHES MAXIMUM IN
Center to Center Distance Between Terminals0.200 INCHES NOMINAL IN
Power Dissipation Rating Per Section in Watts0.7 FREE AIR SINGLE SECTION
Effective Electrical Rotation in Deg Angular Rotation5400.0 MINIMUM AND 10800.0 MAXIMUM
Bearing TypeBEARING SHAFT
Reliability IndicatorNOT ESTABLISHED
Actuator Travel Control FeatureCONTINUOUS MOTION
Test Data Document81349-MIL-R027208/9 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Resistance Tolerance Per Section in Percent-5.0 TO 5.0 SINGLE SECTION
Terminal Type and Quantity3 PIN
Rotary Actuator Travel in Angular Deg360.0 NOMINAL
Ambient Temp in Deg Celsius Per Section at Full Rated Power85.0 SINGLE SECTION
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 3
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5905-01-077-8288 POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON
Possible match (shared part number)
5905-01-095-2573 POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON
Possible match (shared part number)
5905-01-360-0603 POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON
Possible match (shared part number)
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
MIL-R-27208/9 5/9 Secondary reference
U.S. Government activity
RT24C2W503P0RM5PCT 5/2 Secondary reference
U.S. Government activity
RT24C2W503 2/2 Government specification standardization
U.S. Government activity
MIL-PRF-27208/9 4/1 Identification reference
U.S. Government activity
Related Parts
5905-01-077-8288POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON
5905-01-095-2573POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON
5905-01-360-0603POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON

Frequently Asked Questions

What is NSN 5905-01-043-7314?

NSN 5905-01-043-7314 is a Resistor,variable,wire Wound,non, classified under FSC 5905, Resistor. Status: active.

What NSN replaces 5905-01-043-7314?

3 possible matches (shared part number, not a government interchangeability claim): 5905-01-077-8288, 5905-01-095-2573, 5905-01-360-0603. Verify interchangeability with system specifications before substitution.

What are the specifications of 5905-01-043-7314?

Key specifications for 5905-01-043-7314: Maximum Running Torque: 5.00 INCH-OUNCES IN; Electrical Resistance Per Section: 50.000 KILOHMS SINGLE SECTION; Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 150.0 SINGLE SECTION; Section Quantity: 1. 27 specifications are documented in the U.S. Government catalog.

Is NSN 5905-01-043-7314 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com