PartsTable TECHNICAL DATA SHEET
JULY 2026Technical Data Sheet

MIL-PRF-39035/1Resistor,variable,nonwire Wound,

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M · NSN 5905-01-036-7882 · FSC 5905 · No Item Name Available
Verified by PartsTable
NSN 5905-01-036-7882 — this item is cataloged by the U.S. Government under National Stock Number 5905-01-036-7882. Primary manufacturer part number: MIL-PRF-39035/1.
Features
  • Resistor,variable,nonwire Wound, — FSC 5905
  • Actuator Type: SINGLE SHAFT
  • Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius: -100.0 TO 100.0 SINGLE SECTION
  • Shaft Diameter: 0.115 INCHES NOMINAL IN
  • Resistance Tolerance Per Section in Percent: -10.0 TO 10.0 SINGLE SECTION
  • Terminal Type and Quantity: 3 PIN
  • Specification/standard Data: 81349-MIL-R-39035/1 GOVERNMENT SPECIFICATION
  • Test Data Document: 81349-MIL-R-39035 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Applications
  • Circuit regulation and filtering
  • Signal conditioning
  • Power supply stabilization
General Description

The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-01-036-7882, is classified within Federal Supply Class 5905 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 28 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 4 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 2 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-01-036-7882
Primary Part NumberMIL-PRF-39035/1
Item NameResistor,variable,nonwire Wound,
FSC / FSG5905 / 59 — No Item Name Available
ManufacturerMilitary Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
StatusACTIVE
Actuator TypeSINGLE SHAFT
Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius-100.0 TO 100.0 SINGLE SECTION
Shaft Diameter0.115 INCHES NOMINAL IN
Resistance Tolerance Per Section in Percent-10.0 TO 10.0 SINGLE SECTION
Terminal Type and Quantity3 PIN
Specification/standard Data81349-MIL-R-39035/1 GOVERNMENT SPECIFICATION
Test Data Document81349-MIL-R-39035 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Body StyleRECTANGULAR W/MOUNTING HOLES/SLOTS
Section Quantity1
Mounting MethodTERMINAL
Terminal LocationLOWER ADJACENT SIDE SINGLE ROW
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power150.0 SINGLE SECTION
Rotary Actuator Travel in Angular Deg6120.0 MINIMUM AND 9720.0 MAXIMUM
Electrical Resistance Per Section10.0 KILOHMS SINGLE SECTION
Center to Center Distance Between Center Terminal and Outside Terminal0.300 INCHES NOMINAL IN
Power Dissipation Rating Per Section in Watts0.75 FREE AIR SINGLE SECTION
Ambient Temp in Deg Celsius Per Section at Full Rated Power85.0 SINGLE SECTION
Reliability IndicatorNOT ESTABLISHED
Terminal Length0.500 INCHES NOMINAL IN
Lateral Distance Between Mounting Hole Centers1.000 INCHES NOMINAL IN
Actuator Travel Control FeatureCONTINUOUS MOTION
Effective Electrical Rotation in Deg Angular Rotation6120.0 MINIMUM AND 9720.0 MAXIMUM
Shaft StyleROUND, SLOTTED
Shaft Length0.058 INCHES NOMINAL IN
Center to Center Distance Between Terminals0.700 INCHES NOMINAL IN
Body Length1.250 INCHES NOMINAL IN
Body Height0.315 INCHES NOMINAL IN
Body Width0.190 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
HAZMATNo
Verified Substitutes 2
5905-01-267-3927 INTERCHANGEABLE
Resistor,variable,nonwire Wound,
5310-01-641-816643426-2 INTERCHANGEABLE
Washer,flat
United States Department of the Navy Dba Naval Surface Warfare Center Panama City
Cross-Reference Index
Part NumberManufacturer
MIL-PRF-39035/1 Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
RJR12FL103M Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
434262 Cae-Link Corp (USA)
MIL-R-39035/1 Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
Related Parts
5905-01-267-3927INTERCHANGEABLE
RESISTOR,VARIABLE,NONWIRE WOUND,
5310-01-641-8166INTERCHANGEABLE
WASHER,FLAT
43426-2

Frequently Asked Questions

What is NSN 5905-01-036-7882?

NSN 5905-01-036-7882 is a Resistor,variable,nonwire Wound,, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5905 (No Item Name Available). Status: active.

What are the part numbers for NSN 5905-01-036-7882?

NSN 5905-01-036-7882 has 4 cross-referenced part numbers: MIL-PRF-39035/1 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), RJR12FL103M (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 434262 (Cae-Link Corp), MIL-R-39035/1 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).

What NSN replaces 5905-01-036-7882?

There are 2 known substitutes for 5905-01-036-7882: 5905-01-267-3927, 5310-01-641-8166. Verify interchangeability with system specifications before substitution.

What are the specifications of MIL-PRF-39035/1?

Key specifications for MIL-PRF-39035/1: Actuator Type: SINGLE SHAFT; Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius: -100.0 TO 100.0 SINGLE SECTION; Shaft Diameter: 0.115 INCHES NOMINAL IN; Resistance Tolerance Per Section in Percent: -10.0 TO 10.0 SINGLE SECTION. 28 total characteristics are documented in the Federal Logistics Information System.

Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com