PartsTable TECHNICAL DATA SHEET
NSN 5905-01-032-6436Government record, cited

Resistor, Variable, Nonwire Wound,5905-01-032-6436

NSN 5905-01-032-6436 · NIIN 010326436
FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5905-01-032-6436 · 5905010326436 · NIIN 010326436 · 01-032-6436 · FSC 5905 Resistor · MILR39035-1 · RJR12FY502M
Nearby stock numbers  ·
Features
  • Resistor,variable,nonwire Wound, — FSC 5905
  • Electrical Resistance Per Section: 5.0 KILOHMS SINGLE SECTION
  • Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 150.0 SINGLE SECTION
  • Section Quantity: 1
  • Mounting Facility Quantity: 2
  • Shaft Diameter: 0.115 INCHES NOMINAL IN
  • Body Style: RECTANGULAR W/MOUNTING HOLES/SLOTS
  • Terminal Length: 0.500 INCHES NOMINAL IN
Identification
  • NSN: 5905-01-032-6436
  • NIIN: 010326436
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-01-032-6436, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. Government technical data includes 30 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-01-032-6436
Item NameResistor,variable,nonwire Wound,
FSC / FSG5905 / 59 — Resistor
StatusACTIVE
Electrical Resistance Per Section5.0 KILOHMS SINGLE SECTION
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power150.0 SINGLE SECTION
Section Quantity1
Mounting Facility Quantity2
Shaft Diameter0.115 INCHES NOMINAL IN
Body StyleRECTANGULAR W/MOUNTING HOLES/SLOTS
Terminal Length0.500 INCHES NOMINAL IN
Mounting MethodUNTHREADED HOLE(S)
Body Width0.190 INCHES NOMINAL IN
Body Height0.315 INCHES NOMINAL IN
Mounting Hole Diameter0.093 INCHES NOMINAL IN
Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius-100.0 TO 100.0 SINGLE SECTION
Terminal LocationLOWER ADJACENT SIDE TWO ROWS
Reliability Failure Rate Level in Percent1.000
Center to Center Distance Between Center Terminal and Outside Terminal0.300 INCHES NOMINAL IN
Shaft StyleROUND, SLOTTED
Actuator TypeSINGLE SHAFT
Lateral Distance Between Mounting Hole Centers1.000 INCHES NOMINAL IN
Center to Center Distance Between Terminal Rows0.100 INCHES NOMINAL IN
Shaft Length0.058 INCHES NOMINAL IN
Specification/standard Data81349-MIL-R-39035/1 GOVERNMENT SPECIFICATION
Body Length1.250 INCHES NOMINAL IN
Center to Center Distance Between Terminals0.700 INCHES NOMINAL IN
Power Dissipation Rating Per Section in Watts0.75 FREE AIR SINGLE SECTION
Effective Electrical Rotation in Deg Angular Rotation9720.0 NOMINAL
Reliability IndicatorESTABLISHED
Actuator Travel Control FeatureCLUTCH
Test Data Document81349-MIL-R-39035 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Resistance Tolerance Per Section in Percent-10.0 TO 10.0 SINGLE SECTION
Terminal Type and Quantity3 PIN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 2
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5905-01-224-5617 POSSIBLE MATCH
RESISTOR,VARIABLE,NONWIRE WOUND,
Possible match (shared part number)
5905-01-317-3861 POSSIBLE MATCH
RESISTOR,VARIABLE,NONWIRE WOUND,
Possible match (shared part number)
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
MILR39035-1 4/1 Identification reference
U.S. Government activity
RJR12FY502M 2/2 Government specification standardization
U.S. Government activity
Related Parts
5905-01-224-5617POSSIBLE MATCH
RESISTOR,VARIABLE,NONWIRE WOUND,
5905-01-317-3861POSSIBLE MATCH
RESISTOR,VARIABLE,NONWIRE WOUND,

Frequently Asked Questions

What is NSN 5905-01-032-6436?

NSN 5905-01-032-6436 is a Resistor,variable,nonwire Wound,, classified under FSC 5905, Resistor. Status: active.

What NSN replaces 5905-01-032-6436?

2 possible matches (shared part number, not a government interchangeability claim): 5905-01-224-5617, 5905-01-317-3861. Verify interchangeability with system specifications before substitution.

What are the specifications of 5905-01-032-6436?

Key specifications for 5905-01-032-6436: Electrical Resistance Per Section: 5.0 KILOHMS SINGLE SECTION; Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 150.0 SINGLE SECTION; Section Quantity: 1; Mounting Facility Quantity: 2. 30 specifications are documented in the U.S. Government catalog.

Is NSN 5905-01-032-6436 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com