The Resistor,variable,wire Wound,non, cataloged under National Stock Number 5905-01-032-1808, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Lockheed Martin Corporation Div Rms - Mitchel Field. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-01-032-1808 |
| Primary Part Number | 4331-102045-1 |
| Item Name | Resistor,variable,wire Wound,non |
| FSC / FSG | 5905 / 59 — Resistor |
| Manufacturer | Lockheed Martin Corporation Div Rms - Mitchel Field |
| Status | ACTIVE |
| Maximum Running Torque | 6.00 INCH-OUNCES IN |
| Nonturn Device Location | AT 9 OCLOCK |
| Body Diameter | 1.219 INCHES NOMINAL IN |
| Screw Thread Quantity Per Inch | 32.0 |
| Electrical Resistance Per Section | 10.0 KILOHMS SINGLE SECTION |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 105.0 SINGLE SECTION |
| Section Quantity | 1 |
| Shaft Diameter | 0.250 INCHES NOMINAL IN |
| Nonturn Device Radius | 0.531 INCHES NOMINAL IN |
| Fragility Factor | MODERATELY RUGGED |
| Body Style | CYLINDRICAL BUSHING MOUNTED |
| Mounting Method | STANDARD BUSHING |
| Maximum Starting Torque | 6.00 INCH-OUNCES IN |
| Terminal Location | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED |
| Shaft Style | ROUND, SLOTTED |
| Actuator Type | SINGLE SHAFT |
| Shaft Length | 0.875 INCHES NOMINAL IN |
| Body Length | 0.625 INCHES NOMINAL IN |
| Power Dissipation Rating Per Section in Watts | 2.0 FREE AIR SINGLE SECTION |
| Effective Electrical Rotation in Deg Angular Rotation | 290.0 MINIMUM AND 305.0 MAXIMUM |
| Screw Thread Diameter | 0.375 INCHES NOMINAL IN |
| Bearing Type | BALL SHAFT |
| Reliability Indicator | NOT ESTABLISHED |
| Screw Thread Series Designator | UNEF |
| Cubic Measure | 0.729 CUBIC INCHES |
| Actuator Travel Control Feature | STOPS |
| Test Data Document | 56232-4331-102045 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| Resistance Tolerance Per Section in Percent | -10.0 TO 10.0 SINGLE SECTION |
| Terminal Type and Quantity | 3 TAB, SOLDER LUG |
| Rotary Actuator Travel in Angular Deg | 290.0 MINIMUM AND 305.0 MAXIMUM |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 5165188-2 | Naval Sea Systems Command (USA) |
| 4331-102045-1 PRIMARY | Lockheed Martin Corporation Div Rms - Mitchel Field (USA) |
| 2856546-2 | Lockheed Martin Corporation Div Rms - Mitchel Field (USA) |
| Reference | Meaning |
|---|---|
| 2P1457 | 5/9 Secondary reference Cts Corp of California Dba Cts Electronics Corp Paso Robles Div Electromechanical Group |
| CM41574-2 | 5/9 Secondary reference Clarostat Sensors and Controls |
NSN 5905-01-032-1808 is a Resistor,variable,wire Wound,non, manufactured by Lockheed Martin Corporation Div Rms - Mitchel Field, classified under FSC 5905, Resistor. Status: active.
NSN 5905-01-032-1808 has 3 manufacturer part numbers on file: 5165188-2 (Naval Sea Systems Command), 4331-102045-1 (Lockheed Martin Corporation Div Rms - Mitchel Field), 2856546-2 (Lockheed Martin Corporation Div Rms - Mitchel Field).
Key specifications for 4331-102045-1: Maximum Running Torque: 6.00 INCH-OUNCES IN; Nonturn Device Location: AT 9 OCLOCK; Body Diameter: 1.219 INCHES NOMINAL IN; Screw Thread Quantity Per Inch: 32.0. 30 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.