The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-01-025-9029, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. Government technical data includes 30 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-01-025-9029 |
| Item Name | Resistor,variable,nonwire Wound, |
| FSC / FSG | 5905 / 59 — Resistor |
| Status | ACTIVE |
| Body Diameter | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN |
| Screw Thread Quantity Per Inch | 32.0 |
| Electrical Resistance Per Section | 1.0 KILOHMS SINGLE SECTION |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 175.0 SINGLE SECTION |
| Section Quantity | 1 |
| Shaft Diameter | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN |
| Nonturn Device Radius | 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Body Style | CYLINDRICAL BUSHING MOUNTED |
| Mounting Method | STANDARD BUSHING |
| Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius | -250.0 TO 250.0 SINGLE SECTION |
| Terminal Location | REAR END |
| Shaft Style | ROUND, SLOTTED |
| Actuator Type | SINGLE SHAFT |
| Shaft Length | 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN |
| Specification/standard Data | 81349-MIL-R-23285/3 GOVERNMENT SPECIFICATION |
| Body Length | 0.415 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN |
| Power Dissipation Rating Per Section in Watts | 0.500 FREE AIR SINGLE SECTION |
| Effective Electrical Rotation in Deg Angular Rotation | 292.0 MINIMUM AND 298.0 MINIMUM |
| Screw Thread Diameter | 0.250 INCHES NOMINAL IN |
| Reliability Indicator | NOT ESTABLISHED |
| Screw Thread Series Designator | UNEF |
| Actuator Travel Control Feature | STOPS |
| Test Data Document | 81349-MIL-R-23285 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Resistance Tolerance Per Section in Percent | -10.0 TO 10.0 SINGLE SECTION |
| Terminal Type and Quantity | 3 TAB, SOLDER LUG |
| Rotary Actuator Travel in Angular Deg | 292.0 MINIMUM AND 298.0 MAXIMUM |
| Mounting Bushing Length | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN |
| Device Design Type | NONTURN AT 10:30 OCLOCKUNABLE TO DECODE |
| Device Design Type | NONTURN AT 4:30 OCLOCKUNABLE TO DECODE |
| Ambient Temp in Deg Celsius Per Section at Full Rated Power | 125.0 SINGLE SECTION |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| RVC6NYD102B | 2/2 Government specification standardization U.S. Government activity |
| MIL-R-23285/3 | 4/1 Identification reference U.S. Government activity |
| 538067-16 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
NSN 5905-01-025-9029 is a Resistor,variable,nonwire Wound,, classified under FSC 5905, Resistor. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 9340-01-259-9029. Verify interchangeability with system specifications before substitution.
Key specifications for 5905-01-025-9029: Body Diameter: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN; Screw Thread Quantity Per Inch: 32.0; Electrical Resistance Per Section: 1.0 KILOHMS SINGLE SECTION; Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 175.0 SINGLE SECTION. 30 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.