The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-00-995-4701, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Lockheed Martin Corporation Div Rms. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-00-995-4701 |
| Primary Part Number | 77C707833PT2 |
| Item Name | Resistor,variable,nonwire Wound, |
| FSC / FSG | 5905 / 59 — Resistor |
| Manufacturer | Lockheed Martin Corporation Div Rms |
| Status | ACTIVE |
| Body Diameter | 1.995 INCHES MINIMUM AND 2.005 INCHES MAXIMUM IN |
| Lateral Runout | 0.002 INCHES IN |
| Electrical Resistance Per Section | 5.0 KILOHMS SINGLE SECTION |
| Mounting Lip Depth | 0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM IN |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 150.0 SINGLE SECTION |
| Undercut Width | 0.0730 INCHES NOMINAL IN |
| Section Quantity | 1 |
| Shaft Diameter | 0.250 INCHES NOMINAL IN |
| Undercut Diameter | 1.880 INCHES NOMINAL IN |
| Function Characteristic Per Section | SINGLE SECTION LINEAR |
| Body Style | CYLINDRICAL SERVO MOUNTED |
| Function Conformity Tolerance Per Section | -0.05 TO 0.05 SINGLE SECTION |
| Overall Diameter | 1.995 INCHES MINIMUM AND 2.005 INCHES MAXIMUM IN |
| Mounting Method | CLAMP RING(S) |
| Maximum Starting Torque | 1.00 INCH-OUNCES IN |
| Terminal Location | REAR END LOCATION NOT OTHERWISE SPECIFIED |
| Mounting Lip Diameter | 1.9950 INCHES MINIMUM AND 2.0500 INCHES MAXIMUM IN |
| Shaft Style | ROUND |
| Actuator Type | SINGLE SHAFT |
| Shaft Length | 0.672 INCHES NOMINAL IN |
| Pilot Diameter | 1.8745 INCHES NOMINAL IN |
| Body Length | 2.636 INCHES NOMINAL IN |
| Shaft Runout | 0.001 INCHES IN |
| Pilot Length | 0.0350 INCHES NOMINAL IN |
| Power Dissipation Rating Per Section in Watts | 4.0 FREE AIR SINGLE SECTION |
| Effective Electrical Rotation in Deg Angular Rotation | 3600.0 NOMINAL |
| Pilot Diameter Runout | 0.001 INCHES IN |
| Bearing Type | BALL SHAFT |
| Reliability Indicator | NOT ESTABLISHED |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 77C707833PT2 PRIMARY | Lockheed Martin Corporation Div Rms (USA) |
| Reference | Meaning |
|---|---|
| 77C707833P002 | 7/2 Vendor item drawing reference Lockheed Martin Corporation Div Rms |
| 77C707833P2REVL | C/1 Advisory reference — outside the item-of-supply concept Lockheed Martin Corporation Div Rms |
NSN 5905-00-995-4701 is a Resistor,variable,nonwire Wound,, manufactured by Lockheed Martin Corporation Div Rms, classified under FSC 5905, Resistor. Status: active.
NSN 5905-00-995-4701 has 1 manufacturer part number on file: 77C707833PT2 (Lockheed Martin Corporation Div Rms).
Key specifications for 77C707833PT2: Body Diameter: 1.995 INCHES MINIMUM AND 2.005 INCHES MAXIMUM IN; Lateral Runout: 0.002 INCHES IN; Electrical Resistance Per Section: 5.0 KILOHMS SINGLE SECTION; Mounting Lip Depth: 0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM IN. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.