PartsTable TECHNICAL DATA SHEET
NSN 5905-00-951-8063Government record, cited

Resistor, Variable, Wire Wound, Non5905-00-951-8063

NSN 5905-00-951-8063 · NIIN 009518063
FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5905-00-951-8063 · 5905009518063 · NIIN 009518063 · 00-951-8063 · FSC 5905 Resistor · 3010P1-103 · 335C779H010 · 335C779H010
Nearby stock numbers  ·
Features
  • Resistor,variable,wire Wound,non — FSC 5905
  • Electrical Resistance Per Section: 10.000 KILOHMS SINGLE SECTION
  • Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 175.0 SINGLE SECTION
  • Section Quantity: 1
  • Mounting Facility Quantity: 2
  • Shaft Diameter: 0.125 INCHES NOMINAL IN
  • Body Style: RECTANGULAR W/MOUNTING HOLES/SLOTS
  • Terminal Length: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
Identification
  • NSN: 5905-00-951-8063
  • NIIN: 009518063
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Resistor,variable,wire Wound,non, cataloged under National Stock Number 5905-00-951-8063, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. Government technical data includes 27 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-00-951-8063
Item NameResistor,variable,wire Wound,non
FSC / FSG5905 / 59 — Resistor
StatusACTIVE
Electrical Resistance Per Section10.000 KILOHMS SINGLE SECTION
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power175.0 SINGLE SECTION
Section Quantity1
Mounting Facility Quantity2
Shaft Diameter0.125 INCHES NOMINAL IN
Body StyleRECTANGULAR W/MOUNTING HOLES/SLOTS
Terminal Length0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
Mounting MethodUNTHREADED HOLE(S)
Body Width0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
Body Height0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
Mounting Hole Diameter0.088 INCHES MINIMUM IN
Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius-70.0 TO 70.0 SINGLE SECTION
Terminal LocationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
Center to Center Distance Between Center Terminal and Outside Terminal0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
Shaft StyleROUND, SLOTTED
Actuator TypeSINGLE SHAFT
Lateral Distance Between Mounting Hole Centers0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM IN
Shaft Length0.047 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
Body Length1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM IN
Center to Center Distance Between Terminals0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN
Power Dissipation Rating Per Section in Watts1.0 FREE AIR SINGLE SECTION
Reliability IndicatorNOT ESTABLISHED
Test Data Document19315-335C779 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
Resistance Tolerance Per Section in Percent-10.0 TO 10.0 SINGLE SECTION
Terminal Type and Quantity3 PIN
Ambient Temp in Deg Celsius Per Section at Full Rated Power70.0 SINGLE SECTION
Reference Number Differentiating CharacteristicsAS DIFFERENTIATED BY QUALITY CONTROLLED FOR POLARIS
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5905-00-964-2365SMC208992-3 POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON
Possible match (shared part number)Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
3010P1-103 5/9 Secondary reference
U.S. Government activity
335C779H010 3/1 Design control — primary reference
U.S. Government activity
335C779H010 5/1 Secondary reference
Westinghouse Electric Corp
Related Parts
5905-00-964-2365POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON
SMC208992-3

Frequently Asked Questions

What is NSN 5905-00-951-8063?

NSN 5905-00-951-8063 is a Resistor,variable,wire Wound,non, classified under FSC 5905, Resistor. Status: active.

What NSN replaces 5905-00-951-8063?

1 possible match (shared part number, not a government interchangeability claim): 5905-00-964-2365. Verify interchangeability with system specifications before substitution.

What are the specifications of 5905-00-951-8063?

Key specifications for 5905-00-951-8063: Overall Height: 0.780 INCHES MINIMUM AND 0.844 INCHES MAXIMUM IN; Electrical Resistance Per Section: 10.000 KILOHMS SINGLE SECTION; Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 175.0 SINGLE SECTION; Section Quantity: 1. 27 specifications are documented in the U.S. Government catalog.

Is NSN 5905-00-951-8063 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com