The Resistor,variable,wire Wound,non, cataloged under National Stock Number 5905-00-948-4634, is classified within Federal Supply Class 5905 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Bourns Instruments Inc. Government technical data includes 27 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 8 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-00-948-4634 |
| Primary Part Number | 3010P1-501 |
| Item Name | Resistor,variable,wire Wound,non |
| FSC / FSG | 5905 / 59 — No Item Name Available |
| Manufacturer | Bourns Instruments Inc |
| Status | ACTIVE |
| Terminal Length | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN |
| Body Style | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| Mounting Method | UNTHREADED HOLE(S) |
| Terminal Type and Quantity | 3 PIN |
| Resistance Tolerance Per Section in Percent | -5.0 TO 5.0 SINGLE SECTION |
| Ambient Temp in Deg Celsius Per Section at Full Rated Power | 70.0 SINGLE SECTION |
| Power Dissipation Rating Per Section in Watts | 1.0 FREE AIR SINGLE SECTION |
| Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius | -50.0 TO 50.0 SINGLE SECTION |
| Terminal Location | LOWER ADJACENT SIDE SINGLE ROW LOCATION NOT OTHERWISE SPECIFIED |
| Actuator Travel Control Feature | STOPS |
| Test Data Document | 23667-1141642-2 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Center to Center Distance Between Center Terminal and Outside Terminal | 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN |
| Center to Center Distance Between Terminals | 0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN |
| Shaft Length | 0.046 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN |
| Mounting Facility Quantity | 2 |
| Contact Arm Electrical Off Position | FULLY CW |
| Shaft Style | ROUND, SLOTTED |
| Lateral Distance Between Mounting Hole Centers | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM IN |
| Maximum Starting Torque | 5.00 INCH-OUNCES IN |
| Body Height | 0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 175.0 SINGLE SECTION |
| Features Provided | NONMETALLIC SHAFT |
| Mounting Hole Diameter | 0.088 INCHES MINIMUM IN |
| Rotary Actuator Travel in Angular Deg | 9000.0 NOMINAL |
| Shaft Diameter | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN |
| Actuator Type | SINGLE SHAFT |
| Body Length | 1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 3010P1-501 | Bourns Instruments Inc (USA) |
| 1141642-2 | Smiths Detection Inc. Dba Smiths Detection Inc Casc (USA) |
| DMS 85044B | Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) (USA) |
NSN 5905-00-948-4634 is a Resistor,variable,wire Wound,non, manufactured by Bourns Instruments Inc, classified under FSC 5905 (No Item Name Available). Status: active.
NSN 5905-00-948-4634 has 3 cross-referenced part numbers: 3010P1-501 (Bourns Instruments Inc), 1141642-2 (Smiths Detection Inc. Dba Smiths Detection Inc Casc), DMS 85044B (Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)).
There are 8 known substitutes for 5905-00-948-4634: 5905-00-105-7497, 5905-00-759-8237, 5905-00-926-0497 and 5 more. Verify interchangeability with system specifications before substitution.
Key specifications for 3010P1-501: Terminal Length: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN; Body Style: RECTANGULAR W/MOUNTING HOLES/SLOTS; Mounting Method: UNTHREADED HOLE(S); Terminal Type and Quantity: 3 PIN. 30 total characteristics are documented in the Federal Logistics Information System.