The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-00-938-6423, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Lockheed Martin Corporation Div Rms. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 3 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-00-938-6423 |
| Primary Part Number | 7648736PT10 |
| Item Name | Resistor,variable,nonwire Wound, |
| FSC / FSG | 5905 / 59 — Resistor |
| Manufacturer | Lockheed Martin Corporation Div Rms |
| Status | ACTIVE |
| Body Diameter | 1.432 INCHES MINIMUM AND 1.442 INCHES MAXIMUM IN |
| Lateral Runout | 0.002 INCHES IN |
| Electrical Resistance Per Section | 5.0 KILOHMS ALL SECTIONS |
| Mounting Lip Depth | 0.0880 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM IN |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 125.0 SINGLE SECTION |
| Undercut Width | 0.0730 INCHES NOMINAL IN |
| Section Quantity | 2 |
| Shaft Diameter | 0.120 INCHES NOMINAL IN |
| Undercut Diameter | 1.312 INCHES NOMINAL IN |
| Function Characteristic Per Section | ALL SECTIONS LINEAR |
| Body Style | CYLINDRICAL SERVO MOUNTED |
| Function Conformity Tolerance Per Section | -0.01 TO 0.01 ALL SECTIONS |
| Overall Diameter | 1.627 INCHES NOMINAL IN |
| Mounting Method | CLAMP RING(S) |
| Maximum Starting Torque | 0.70 INCH-OUNCES IN |
| Fixed Tap Quantity Per Section | 1 ALL SECTIONS |
| Terminal Location | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED |
| Mounting Lip Diameter | 1.4370 INCHES NOMINAL IN |
| Shaft Style | ROUND |
| Actuator Type | SINGLE SHAFT |
| Shaft Length | 0.672 INCHES NOMINAL IN |
| Pilot Diameter | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM IN |
| Body Length | 1.500 INCHES NOMINAL IN |
| Shaft Runout | 0.001 INCHES IN |
| Pilot Length | 0.1270 INCHES MINIMUM AND 0.1370 INCHES MAXIMUM IN |
| Tap Location Tolerance Per Section | -2.0 TO 2.0 DEG ANGULAR ROTATION ALL SECTIONS |
| Power Dissipation Rating Per Section in Watts | 2.0 FREE AIR ALL SECTIONS |
| Effective Electrical Rotation in Deg Angular Rotation | 350.0 NOMINAL |
| Pilot Diameter Runout | 0.001 INCHES IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 7648736PT10 PRIMARY | Lockheed Martin Corporation Div Rms (USA) |
| 60865 | General Dynamics Motion Control Llc (USA) |
| 749-6180 | Servo Instrument Corporation (USA) |
| Reference | Meaning |
|---|---|
| 749-6180 | 5/9 Secondary reference Bunker Ramo Corp Amphenol Controls Div |
| 7648736PT10REVU | C/1 Advisory reference — outside the item-of-supply concept Lockheed Martin Corporation Div Rms |
| 7648736PT10 | 5/9 Secondary reference U.S. Government activity |
| 7648736P010 | 5/9 Secondary reference Lockheed Martin Corporation Div Rms |
NSN 5905-00-938-6423 is a Resistor,variable,nonwire Wound,, manufactured by Lockheed Martin Corporation Div Rms, classified under FSC 5905, Resistor. Status: active.
NSN 5905-00-938-6423 has 3 manufacturer part numbers on file: 7648736PT10 (Lockheed Martin Corporation Div Rms), 60865 (General Dynamics Motion Control Llc), 749-6180 (Servo Instrument Corporation).
3 possible matches (shared part number, not a government interchangeability claim): 5340-01-247-1570, 5325-01-597-9207, 5365-01-664-8388. Verify interchangeability with system specifications before substitution.
Key specifications for 7648736PT10: Body Diameter: 1.432 INCHES MINIMUM AND 1.442 INCHES MAXIMUM IN; Lateral Runout: 0.002 INCHES IN; Electrical Resistance Per Section: 5.0 KILOHMS ALL SECTIONS; Mounting Lip Depth: 0.0880 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM IN. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.