PartsTable TECHNICAL DATA SHEET
NSN 5905-00-926-0508Government record, cited

Resistor, Fixed, Wire Wound, Induct5905-00-926-0508

NSN 5905-00-926-0508 · NIIN 009260508 · Part number 5M.5112.223.63
Hensoldt Sensors Gmbh Div Seps · FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components · CAGE D1901
Government record, cited
NSN 5905-00-926-0508 — this item is cataloged by the U.S. Government under National Stock Number 5905-00-926-0508. Manufacturer of record part number: 5M.5112.223.63.
Also searched as  5905-00-926-0508 · 5905009260508 · NIIN 009260508 · 00-926-0508 · FSC 5905 Resistor · CAGE D1901 · 5M.5112.223.63 · MILR18546-1 · RE70G6R81
Nearby stock numbers  ·
Features
  • Resistor,fixed,wire Wound,induct — FSC 5905
  • Resistance Tolerance in Percent: -1.000 TO 1.000-1.000 TO 1.000
  • Temp Coefficient of Resistance in Ppm Per Deg Celsius: -50.0 TO 50.0-50.0 TO 50.0
  • Electrical Resistance: 6.810 OHMS6.810 OHMS
  • Inclosure Type: ENCASEDENCASED
  • Mounting Hole Size: 0.125 INCHES NOMINAL0.125 INCHES NOMINAL IN
  • Terminal Type: TAB, SOLDER LUGTAB, SOLDER LUG
  • Distance Between Centerlines of Mounting Facilities Parallel to Body Length: 0.719 INCHES NOMINAL0.719 INCHES NOMINAL IN
Identification
  • NSN: 5905-00-926-0508
  • NIIN: 009260508
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: 5M.5112.223.63
  • Manufacturer: Hensoldt Sensors Gmbh Div Seps
General Description

The Resistor,fixed,wire Wound,induct, cataloged under National Stock Number 5905-00-926-0508, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Hensoldt Sensors Gmbh Div Seps. Government technical data includes 23 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-00-926-0508
Primary Part Number5M.5112.223.63
Item NameResistor,fixed,wire Wound,induct
FSC / FSG5905 / 59 — Resistor
ManufacturerHensoldt Sensors Gmbh Div Seps
StatusACTIVE
Resistance Tolerance in Percent-1.000 TO 1.000-1.000 TO 1.000
Temp Coefficient of Resistance in Ppm Per Deg Celsius-50.0 TO 50.0-50.0 TO 50.0
Electrical Resistance6.810 OHMS6.810 OHMS
Inclosure TypeENCASEDENCASED
Mounting Hole Size0.125 INCHES NOMINAL0.125 INCHES NOMINAL IN
Terminal TypeTAB, SOLDER LUGTAB, SOLDER LUG
Distance Between Centerlines of Mounting Facilities Parallel to Body Length0.719 INCHES NOMINAL0.719 INCHES NOMINAL IN
Heat Sink Thickness0.040 INCHES0.040 INCHES IN
Terminal Length0.438 INCHES NOMINAL0.438 INCHES NOMINAL IN
Body Width0.531 INCHES NOMINAL0.531 INCHES NOMINAL IN
Body Height0.562 INCHES NOMINAL0.562 INCHES NOMINAL IN
Temp Range of Temp Coefficient in Deg Celsius-55.0 TO 275.0-55.0 TO 275.0
Style DesignatorAXIAL TERMINAL (S)
Heat Sink Height2.000 INCHES2.000 INCHES IN
Power Dissipation Rating in Watts8.000 FREE AIR8.000 FREE AIR
Heat Sink Length7.000 INCHES7.000 INCHES IN
Ambient Temp at Full Rated Power25.0 CELSIUS25.0 CELSIUS DEGC
Body Length1.062 INCHES NOMINAL1.062 INCHES NOMINAL IN
Ambient Temp in Deg Celsius at Zero Percent Rated Power275.0275.0
Heat Sink Width5.000 INCHES5.000 INCHES IN
Reliability IndicatorNOT ESTABLISHEDNOT ESTABLISHED
Test Data Document81349-MILR18546/1 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
MaterialALUMINUM ALLOY HEAT SINK
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
5M.5112.223.63 Hensoldt Sensors Gmbh Div Seps (DEU)
Reference documents
ReferenceMeaning
MILR18546-1 4/1 Identification reference
U.S. Government activity
RE70G6R81 2/2 Government specification standardization
U.S. Government activity

Frequently Asked Questions

What is NSN 5905-00-926-0508?

NSN 5905-00-926-0508 is a Resistor,fixed,wire Wound,induct, manufactured by Hensoldt Sensors Gmbh Div Seps, classified under FSC 5905, Resistor. Status: active.

What part numbers are listed for NSN 5905-00-926-0508?

NSN 5905-00-926-0508 has 1 manufacturer part number on file: 5M.5112.223.63 (Hensoldt Sensors Gmbh Div Seps).

What are the specifications of 5M.5112.223.63?

Key specifications for 5M.5112.223.63: Resistance Tolerance in Percent: -1.000 TO 1.000-1.000 TO 1.000; Temp Coefficient of Resistance in Ppm Per Deg Celsius: -50.0 TO 50.0-50.0 TO 50.0; Electrical Resistance: 6.810 OHMS6.810 OHMS; Inclosure Type: ENCASEDENCASED. 23 specifications are documented in the U.S. Government catalog.

Is NSN 5905-00-926-0508 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com