The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-00-898-2085, is classified within Federal Supply Class 5905 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Bourns Instruments Inc. Government technical data includes 25 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 5 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 4 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 5905-00-898-2085 |
| Primary Part Number | 434263 |
| Item Name | Resistor,variable,nonwire Wound, |
| FSC / FSG | 5905 / 59 — No Item Name Available |
| Manufacturer | Bourns Instruments Inc |
| Status | CANCELLED |
| Center to Center Distance Between Terminals | 0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM IN |
| Test Data Document | 81349-MIL-R-22097 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Mounting Hole Diameter | 0.093 INCHES NOMINAL IN |
| Specification/standard Data | 81349-MIL-R-22097/2 GOVERNMENT SPECIFICATION |
| Shaft Length | 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN |
| Body Style | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| Mounting Method | TERMINAL |
| Terminal Location | REAR END |
| Features Provided | NONMETALLIC SHAFT |
| Electrical Resistance Per Section | 20.0 KILOHMS SINGLE SECTION |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 150.0 SINGLE SECTION |
| Resistance Tolerance Per Section in Percent | -10.0 TO 10.0 SINGLE SECTION |
| Body Length | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN |
| Lateral Distance Between Mounting Hole Centers | 0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM IN |
| Shaft Diameter | 0.100 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN |
| Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius | -250.0 TO 250.0 SINGLE SECTION |
| Section Quantity | 1 |
| Body Width | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN |
| Shaft Style | ROUND, SLOTTED |
| Body Height | 0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN |
| Power Dissipation Rating Per Section in Watts | 0.8 FREE AIR SINGLE SECTION |
| Actuator Type | SINGLE SHAFT |
| Terminal Type and Quantity | 3 WIRE LEAD |
| Ambient Temp in Deg Celsius Per Section at Full Rated Power | 85.0 SINGLE SECTION |
| Reliability Indicator | NOT ESTABLISHED |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 434263 | Bourns Instruments Inc (USA) |
| 1000-0008 | Lilbern Design of Virginia Llc (USA) |
| MIL-R-22097/2 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| RJ12CL203 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MIL-PRF-22097/2 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5905-00-898-2085 is a Resistor,variable,nonwire Wound,, manufactured by Bourns Instruments Inc, classified under FSC 5905 (No Item Name Available). Status: cancelled.
NSN 5905-00-898-2085 has 5 cross-referenced part numbers: 434263 (Bourns Instruments Inc), 1000-0008 (Lilbern Design of Virginia Llc), MIL-R-22097/2 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), RJ12CL203 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MIL-PRF-22097/2 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There are 4 known substitutes for 5905-00-898-2085: 5935-00-432-0854, 5905-01-068-2228, 3040-01-459-6836 and 1 more. Verify interchangeability with system specifications before substitution.
Key specifications for 434263: Center to Center Distance Between Terminals: 0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM IN; Test Data Document: 81349-MIL-R-22097 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).; Mounting Hole Diameter: 0.093 INCHES NOMINAL IN; Specification/standard Data: 81349-MIL-R-22097/2 GOVERNMENT SPECIFICATION. 25 total characteristics are documented in the Federal Logistics Information System.
NSN 5905-00-898-2085 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.