PartsTable TECHNICAL DATA SHEET
NSN 5905-00-879-7718Government record, cited

Resistor, Variable, Nonwire Wound,5905-00-879-7718

NSN 5905-00-879-7718 · NIIN 008797718 · Part number 8445008
Army, United States Department of the Dba Rock Island Arsenal Jmtc · FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components · CAGE 19204
Government record, cited
NSN 5905-00-879-7718 — this item is cataloged by the U.S. Government under National Stock Number 5905-00-879-7718. Manufacturer of record part number: 8445008.
Also searched as  5905-00-879-7718 · 5905008797718 · NIIN 008797718 · 00-879-7718 · FSC 5905 Resistor · CAGE 19204 · 8445008
Nearby stock numbers  ·
Features
  • Resistor,variable,nonwire Wound, — FSC 5905
  • Body Diameter: 0.890 INCHES NOMINAL0.890 INCHES NOMINAL IN
  • Screw Thread Quantity Per Inch: 40.040.0
  • Electrical Resistance Per Section: 1.000 KILOHMS SINGLE SECTION1.000 KILOHMS SINGLE SECTION
  • Mounting Lip Depth: 0.0620 INCHES NOMINAL0.0620 INCHES NOMINAL IN
  • Section Quantity: 11
  • Mounting Facility Quantity: 33
  • Shaft Diameter: 0.1245 INCHES MINIMUM AND 0.1245 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM0.1250 INCHES MAXIMUM IN
Identification
  • NSN: 5905-00-879-7718
  • NIIN: 008797718
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: 8445008
  • Manufacturer: Army, United States Department of the Dba Rock Island Arsenal Jmtc
General Description

The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-00-879-7718, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Army, United States Department of the Dba Rock Island Arsenal Jmtc. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-00-879-7718
Primary Part Number8445008
Item NameResistor,variable,nonwire Wound,
FSC / FSG5905 / 59 — Resistor
ManufacturerArmy, United States Department of the Dba Rock Island Arsenal Jmtc
StatusACTIVE
Body Diameter0.890 INCHES NOMINAL0.890 INCHES NOMINAL IN
Screw Thread Quantity Per Inch40.040.0
Electrical Resistance Per Section1.000 KILOHMS SINGLE SECTION1.000 KILOHMS SINGLE SECTION
Mounting Lip Depth0.0620 INCHES NOMINAL0.0620 INCHES NOMINAL IN
Section Quantity11
Mounting Facility Quantity33
Shaft Diameter0.1245 INCHES MINIMUM AND 0.1245 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM0.1250 INCHES MAXIMUM IN
Shaft Bearing TypeBEARING
Undercut Diameter0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN
Function Characteristic Per SectionSINGLE SECTION LINEARSINGLE SECTION LINEAR
Body StyleCYLINDRICAL SERVO MOUNTEDCYLINDRICAL SERVO MOUNTED
Function Conformity Tolerance Per Section-0.50 TO 0.50 SINGLE SECTION-0.50 TO 0.50 SINGLE SECTION
Contact Arm Electrical Off PositionFULLY CWFULLY CW
Angle Between Centerlines of Mounting Holes in Deg120.0120.0
Mounting MethodTHREADED HOLE(S)THREADED HOLE(S)
Maximum Starting Torque0.75 INCH-OUNCES0.75 INCH-OUNCES IN
Fixed Tap Quantity Per Section3 SINGLE SECTION3 SINGLE SECTION
Terminal LocationRADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCERADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE
Mounting Lip Diameter0.8900 INCHES NOMINAL0.8900 INCHES NOMINAL IN
Actuator TypeDOUBLE ENDED SHAFTDOUBLE ENDED SHAFT
Pilot Diameter0.7495 INCHES MINIMUM AND 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM0.7500 INCHES MAXIMUM IN
Body Length0.635 INCHES NOMINAL0.635 INCHES NOMINAL IN
Pilot Length0.0700 INCHES MINIMUM AND 0.0700 INCHES MINIMUM AND 0.07025 INCHES MAXIMUM0.07025 INCHES MAXIMUM IN
Tap Location Tolerance Per Section-1.0 TO 1.0 OHMS SINGLE SECTION-1.0 TO 1.0 OHMS SINGLE SECTION
Angle30.0 DEGREES MOUNTING HOLE
Screw Thread Diameter0.112 INCHES NOMINAL0.112 INCHES NOMINAL IN
Reliability IndicatorNOT ESTABLISHEDNOT ESTABLISHED
Screw Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)UNIFIED NATIONAL COARSE (UNC)
Actuator Travel Control FeatureCONTINUOUS MOTIONCONTINUOUS MOTION
Resistance Tolerance Per Section in Percent-10.0 TO 10.0 SINGLE SECTION-10.0 TO 10.0 SINGLE SECTION
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
8445008 PRIMARY Army, United States Department of the Dba Rock Island Arsenal Jmtc (USA)
No interchangeability data on file.
Other items in FSC 5905 — Resistor
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5905-00-000-0136
RESISTOR NETWORK,FIXED,FILM
5905-00-000-0488
5905-00-000-0488 · Item name not on file
5905-00-000-8809
5905-00-000-8809 · Item name not on file
5905-00-000-8833
5905-00-000-8833 · Item name not on file
5905-00-000-9526
5905-00-000-9526 · Item name not on file
5905-00-001-1342
5905-00-001-1342 · Item name not on file
5905-00-001-1573
5905-00-001-1573 · Item name not on file
5905-00-001-2059
5905-00-001-2059 · Item name not on file

Frequently Asked Questions

What is NSN 5905-00-879-7718?

NSN 5905-00-879-7718 is a Resistor,variable,nonwire Wound,, manufactured by Army, United States Department of the Dba Rock Island Arsenal Jmtc, classified under FSC 5905, Resistor. Status: active.

What part numbers are listed for NSN 5905-00-879-7718?

NSN 5905-00-879-7718 has 1 manufacturer part number on file: 8445008 (Army, United States Department of the Dba Rock Island Arsenal Jmtc).

What are the specifications of 8445008?

Key specifications for 8445008: Body Diameter: 0.890 INCHES NOMINAL0.890 INCHES NOMINAL IN; Screw Thread Quantity Per Inch: 40.040.0; Electrical Resistance Per Section: 1.000 KILOHMS SINGLE SECTION1.000 KILOHMS SINGLE SECTION; Mounting Lip Depth: 0.0620 INCHES NOMINAL0.0620 INCHES NOMINAL IN. 30 specifications are documented in the U.S. Government catalog.

Is NSN 5905-00-879-7718 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com