PartsTable TECHNICAL DATA SHEET
NSN 5905-00-874-3082Government record, cited

Resistor, Variable, Wire Wound, Pre5905-00-874-3082

NSN 5905-00-874-3082 · NIIN 008743082 · Part number 900217-102
Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp · FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components · CAGE 06481
Government record, cited
NSN 5905-00-874-3082 — this item is cataloged by the U.S. Government under National Stock Number 5905-00-874-3082. Manufacturer of record part number: 900217-102.
Also searched as  5905-00-874-3082 · 5905008743082 · NIIN 008743082 · 00-874-3082 · FSC 5905 Resistor · CAGE 06481 · 900217-102 · 700-5520 · 700-5520 · 09SW2448
Nearby stock numbers  ·
Features
  • Resistor,variable,wire Wound,pre — FSC 5905
  • Maximum Running Torque: 0.12 INCH-OUNCES IN
  • Body Diameter: 0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
  • Lateral Runout: 0.0015 INCHES IN
  • Electrical Resistance Per Section: 10.0 KILOHMS SINGLE SECTION
  • Mounting Lip Depth: 0.0520 INCHES MINIMUM AND 0.0720 INCHES MAXIMUM IN
  • Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 125.0 SINGLE SECTION
  • Undercut Width: 0.0520 INCHES MINIMUM AND 0.0720 INCHES MAXIMUM IN
Identification
  • NSN: 5905-00-874-3082
  • NIIN: 008743082
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: 900217-102
  • Manufacturer: Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp
General Description

The Resistor,variable,wire Wound,pre, cataloged under National Stock Number 5905-00-874-3082, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-00-874-3082
Primary Part Number900217-102
Item NameResistor,variable,wire Wound,pre
FSC / FSG5905 / 59 — Resistor
ManufacturerNorthrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp
StatusACTIVE
Maximum Running Torque0.12 INCH-OUNCES IN
Body Diameter0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
Lateral Runout0.0015 INCHES IN
Electrical Resistance Per Section10.0 KILOHMS SINGLE SECTION
Mounting Lip Depth0.0520 INCHES MINIMUM AND 0.0720 INCHES MAXIMUM IN
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power125.0 SINGLE SECTION
Undercut Width0.0520 INCHES MINIMUM AND 0.0720 INCHES MAXIMUM IN
Section Quantity1
Shaft Diameter0.1245 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM IN
Undercut Diameter0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
Function Characteristic Per SectionSINGLE SECTION LINEAR
Body StyleCYLINDRICAL SERVO MOUNTED
Function Conformity Tolerance Per Section-0.50 TO 0.50 SINGLE SECTION
Shaft End Play0.003 INCHES IN
Overall Diameter0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
Tap Location From Ccw Terminal Per Section in Ohms5000.0 SINGLE SECTION
Mounting MethodCLAMP RING(S)
Maximum Starting Torque0.12 INCH-OUNCES IN
Fixed Tap Quantity Per Section1 SINGLE SECTION
Terminal LocationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
Mounting Lip Diameter0.8650 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM IN
Shaft StyleROUND, SLOTTED
Actuator TypeDOUBLE ENDED SHAFT
Shaft Length0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
Pilot Diameter0.7400 INCHES MINIMUM AND 0.7600 INCHES MAXIMUM IN
Body Length0.978 INCHES MINIMUM AND 0.988 INCHES MAXIMUM IN
Shaft Runout0.001 INCHES IN
Pilot Length0.0520 INCHES MINIMUM AND 0.0720 INCHES MAXIMUM IN
Tap Location Tolerance Per Section-500.0 TO 500.0 OHMS SINGLE SECTION
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 2
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5330-01-271-83063916042 POSSIBLE MATCH
GASKET
Possible match (shared part number)Cummins Inc.
2590-01-623-0846700-5520 POSSIBLE MATCH
BRACKET,VEHICULAR COMPONENTS
Possible match (shared part number)Bmi Defense Systems, Inc
Cross-Reference Index
Part NumberManufacturer
700-5520 IV-Electronic Klaus Vespermann Kg (DEU)
700-5520 Vishay Sprague Inc (USA)
900217-102 PRIMARY Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp (USA)
Reference documents
ReferenceMeaning
09SW2448 5/1 Secondary reference
Es Beta, Inc Dba Betatronix Div Betatronix
Related Parts
5330-01-271-8306POSSIBLE MATCH
GASKET
3916042
2590-01-623-0846POSSIBLE MATCH
BRACKET,VEHICULAR COMPONENTS
700-5520

Frequently Asked Questions

What is NSN 5905-00-874-3082?

NSN 5905-00-874-3082 is a Resistor,variable,wire Wound,pre, manufactured by Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp, classified under FSC 5905, Resistor. Status: active.

What part numbers are listed for NSN 5905-00-874-3082?

NSN 5905-00-874-3082 has 3 manufacturer part numbers on file: 700-5520 (IV-Electronic Klaus Vespermann Kg), 700-5520 (Vishay Sprague Inc), 900217-102 (Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp).

What NSN replaces 5905-00-874-3082?

2 possible matches (shared part number, not a government interchangeability claim): 5330-01-271-8306, 2590-01-623-0846. Verify interchangeability with system specifications before substitution.

What are the specifications of 900217-102?

Key specifications for 900217-102: Maximum Running Torque: 0.12 INCH-OUNCES IN; Body Diameter: 0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN; Lateral Runout: 0.0015 INCHES IN; Electrical Resistance Per Section: 10.0 KILOHMS SINGLE SECTION. 29 specifications are documented in the U.S. Government catalog.

Is NSN 5905-00-874-3082 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com