PartsTable TECHNICAL DATA SHEET
NSN 5905-00-869-2810Government record, cited

Resistor, Variable, Wire Wound, Non5905-00-869-2810

NSN 5905-00-869-2810 · NIIN 008692810
FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5905-00-869-2810 · 5905008692810 · NIIN 008692810 · 00-869-2810 · FSC 5905 Resistor · 3700S1-503 · 579R431H07 · 37005-1-503
Nearby stock numbers  ·
Features
  • Resistor,variable,wire Wound,non — FSC 5905
  • Maximum Running Torque: 0.60 INCH-OUNCES IN
  • Body Diameter: 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
  • Screw Thread Quantity Per Inch: 32.0
  • Electrical Resistance Per Section: 50.0 KILOHMS SINGLE SECTION
  • Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 125.0 SINGLE SECTION
  • Section Quantity: 1
  • Shaft Diameter: 0.093 INCHES NOMINAL IN
Identification
  • NSN: 5905-00-869-2810
  • NIIN: 008692810
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Resistor,variable,wire Wound,non, cataloged under National Stock Number 5905-00-869-2810, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. Government technical data includes 29 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-00-869-2810
Item NameResistor,variable,wire Wound,non
FSC / FSG5905 / 59 — Resistor
StatusACTIVE
Maximum Running Torque0.60 INCH-OUNCES IN
Body Diameter0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
Screw Thread Quantity Per Inch32.0
Electrical Resistance Per Section50.0 KILOHMS SINGLE SECTION
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power125.0 SINGLE SECTION
Section Quantity1
Shaft Diameter0.093 INCHES NOMINAL IN
Function Characteristic Per SectionSINGLE SECTION LINEAR
Body StyleCYLINDRICAL BUSHING MOUNTED
Function Conformity Tolerance Per Section-0.50 TO 0.50 SINGLE SECTION
Overall Diameter0.670 INCHES NOMINAL IN
Mounting MethodSTANDARD BUSHING
Maximum Starting Torque0.60 INCH-OUNCES IN
Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius-50.0 TO 50.0 SINGLE SECTION
Terminal LocationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
Shaft StyleROUND, SLOTTED
Actuator TypeSINGLE SHAFT
Shaft Length0.660 INCHES MINIMUM AND 0.720 INCHES MAXIMUM IN
Body Length0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
Maximum Stop Torque20.00 INCH-OUNCES IN
Power Dissipation Rating Per Section in Watts1.0 FREE AIR SINGLE SECTION
Effective Electrical Rotation in Deg Angular Rotation3600.0 MINIMUM
Screw Thread Diameter0.250 INCHES NOMINAL IN
Reliability IndicatorNOT ESTABLISHED
Screw Thread Series DesignatorUNEF
Actuator Travel Control FeatureSTOPS
Test Data Document97942-MIL-STD-446 GROUP 4 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Resistance Tolerance Per Section in Percent-5.0 TO 5.0 SINGLE SECTION
Terminal Type and Quantity3 TURRET
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
3700S1-503 3/2 Design control — primary reference
U.S. Government activity
579R431H07 5/2 Secondary reference
U.S. Government activity
37005-1-503 C/1 Advisory reference — outside the item-of-supply concept
U.S. Government activity

Frequently Asked Questions

What is NSN 5905-00-869-2810?

NSN 5905-00-869-2810 is a Resistor,variable,wire Wound,non, classified under FSC 5905, Resistor. Status: active.

What are the specifications of 5905-00-869-2810?

Key specifications for 5905-00-869-2810: Maximum Running Torque: 0.60 INCH-OUNCES IN; Body Diameter: 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN; Screw Thread Quantity Per Inch: 32.0; Electrical Resistance Per Section: 50.0 KILOHMS SINGLE SECTION. 29 specifications are documented in the U.S. Government catalog.

Is NSN 5905-00-869-2810 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com