PartsTable TECHNICAL DATA SHEET
NSN 5905-00-841-4382Government record, cited

Resistor, Variable, Wire Wound, Non5905-00-841-4382

NSN 5905-00-841-4382 · NIIN 008414382
FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5905-00-841-4382 · 5905008414382 · NIIN 008414382 · 00-841-4382 · FSC 5905 Resistor · M22/10-00051FD · RP351FD5R0KK · MIL-PRF-22/10 · MILR22-10 · 4171783-026
Nearby stock numbers  ·
Features
  • Resistor,variable,wire Wound,non — FSC 5905
  • Body Diameter: 5.090 INCHES MAXIMUM IN
  • Screw Thread Quantity Per Inch: 20.0
  • Electrical Resistance Per Section: 5.0 OHMS SINGLE SECTION
  • Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 340.0 SINGLE SECTION
  • Section Quantity: 1
  • Mounting Facility Quantity: 2
  • Shaft Diameter: 0.375 INCHES NOMINAL IN
Identification
  • NSN: 5905-00-841-4382
  • NIIN: 008414382
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Resistor,variable,wire Wound,non, cataloged under National Stock Number 5905-00-841-4382, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. Government technical data includes 28 specifications, cited from the U.S. Government catalog. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 7 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-00-841-4382
Item NameResistor,variable,wire Wound,non
FSC / FSG5905 / 59 — Resistor
StatusACTIVE
Body Diameter5.090 INCHES MAXIMUM IN
Screw Thread Quantity Per Inch20.0
Electrical Resistance Per Section5.0 OHMS SINGLE SECTION
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power340.0 SINGLE SECTION
Section Quantity1
Mounting Facility Quantity2
Shaft Diameter0.375 INCHES NOMINAL IN
Body StyleCYLINDRICAL BUSHING MOUNTED
Overall Diameter5.940 INCHES MAXIMUM IN
First Flat Length0.719 INCHES MINIMUM IN
Mounting MethodTHREADED HOLE(S)
Terminal LocationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
Shaft StyleROUND, FLATTED
Actuator TypeSINGLE SHAFT
Shaft Length0.875 INCHES NOMINAL IN
Specification/standard Data81349-MIL-R-22/10 GOVERNMENT SPECIFICATION
Body Length2.160 INCHES MAXIMUM IN
Power Dissipation Rating Per Section in Watts225.0 HEAT SINK SINGLE SECTION
Screw Thread Diameter0.250 INCHES NOMINAL IN
Reliability IndicatorNOT ESTABLISHED
Screw Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)
Actuator Travel Control FeatureSTOPS
Test Data Document81349-MIL-R-22 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Resistance Tolerance Per Section in Percent-10.0 TO 10.0 SINGLE SECTION
Terminal Type and Quantity3 TAB, SOLDER LUG
Rotary Actuator Travel in Angular Deg310.0 NOMINAL
Flat Height0.344 INCHES NOMINAL IN
Ambient Temp in Deg Celsius Per Section at Full Rated Power25.0 SINGLE SECTION
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 7
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5905-00-931-3752 POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON
Possible match (shared part number)
5905-00-974-6844 POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON
Possible match (shared part number)
5905-00-989-3694 POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON
Possible match (shared part number)
5905-00-990-0827 POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON
Possible match (shared part number)
5905-01-177-9474 POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON
Possible match (shared part number)
5905-01-265-7901 POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON
Possible match (shared part number)
5905-01-265-7906 POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON
Possible match (shared part number)
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
M22/10-00051FD 2/2 Government specification standardization
U.S. Government activity
RP351FD5R0KK 5/1 Secondary reference
U.S. Government activity
MIL-PRF-22/10 4/1 Identification reference
U.S. Government activity
MILR22-10 5/9 Secondary reference
U.S. Government activity
4171783-026 C/1 Advisory reference — outside the item-of-supply concept
U.S. Government activity
Related Parts
5905-00-931-3752POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON
5905-00-974-6844POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON
5905-00-989-3694POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON
5905-00-990-0827POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON
5905-01-177-9474POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON
5905-01-265-7901POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON
5905-01-265-7906POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON

Frequently Asked Questions

What is NSN 5905-00-841-4382?

NSN 5905-00-841-4382 is a Resistor,variable,wire Wound,non, classified under FSC 5905, Resistor. Status: active.

What NSN replaces 5905-00-841-4382?

7 possible matches (shared part number, not a government interchangeability claim): 5905-00-931-3752, 5905-00-974-6844, 5905-00-989-3694. Verify interchangeability with system specifications before substitution.

What are the specifications of 5905-00-841-4382?

Key specifications for 5905-00-841-4382: Body Diameter: 5.090 INCHES MAXIMUM IN; Screw Thread Quantity Per Inch: 20.0; Electrical Resistance Per Section: 5.0 OHMS SINGLE SECTION; Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 340.0 SINGLE SECTION. 28 specifications are documented in the U.S. Government catalog.

Is NSN 5905-00-841-4382 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com