The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-00-828-5807, is classified within Federal Supply Class 5905 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Hewlett-Packard Company Dba HP. Government technical data includes 28 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 8 commercial cross-references from 5 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 5905-00-828-5807 |
| Primary Part Number | 2100-0408 |
| Item Name | Resistor,variable,nonwire Wound, |
| FSC / FSG | 5905 / 59 — No Item Name Available |
| Manufacturer | Hewlett-Packard Company Dba HP |
| Status | CANCELLED |
| Body Style | CYLINDRICAL BUSHING MOUNTED |
| Test Data Document | 81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Body Length | 0.453 INCHES NOMINAL IN |
| Mounting Bushing Length | 0.375 INCHES NOMINAL IN |
| Reliability Indicator | NOT ESTABLISHED |
| Nonturn Device Radius | 0.438 INCHES NOMINAL IN |
| Rotary Actuator Travel in Angular Deg | 251.0 MINIMUM AND 318.0 MAXIMUM |
| Screw Thread Quantity Per Inch | 32.0 |
| Device Design Type | NONTURN AT 9:00 OCLOCKUNABLE TO DECODE |
| Resistance Temp Characteristic Range Per Section in Percent | -3.0 TO 0.0 -55 DEG CELSIUS SINGLE SECTION AND -5.0 TO 10.0 -25 DEG CELSIUS SINGLE SECTION AND -5.0 TO 10.0 25 DEG CELSIUS SINGLE SECTION AND +0.0 TO 3.0 120 DEG CELSIUS SINGLE SECTION |
| Electrical Resistance Per Section | 250.0 OHMS SINGLE SECTION |
| Mounting Method | STANDARD BUSHING |
| Screw Thread Series Designator | UNEF |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 120.0 SINGLE SECTION |
| Screw Thread Diameter | 0.375 INCHES NOMINAL IN |
| Terminal Type and Quantity | 3 TAB, SOLDER LUG |
| Specification/standard Data | 81349-MIL-R-94/4 GOVERNMENT SPECIFICATION |
| Ambient Temp in Deg Celsius Per Section at Full Rated Power | 70.0 SINGLE SECTION |
| Shaft Style | ROUND, SLOTTED |
| Shaft Length | 0.875 INCHES NOMINAL IN |
| Actuator Type | SINGLE SHAFT |
| Resistance Tolerance Per Section in Percent | -10.0 TO 10.0 SINGLE SECTION |
| Shaft Diameter | 0.250 INCHES NOMINAL IN |
| Terminal Location | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| Section Quantity | 1 |
| Body Diameter | 0.906 INCHES NOMINAL IN |
| Actuator Travel Control Feature | STOPS |
| Power Dissipation Rating Per Section in Watts | 1.0 FREE AIR SINGLE SECTION |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 2100-0408 | Hewlett-Packard Company Dba HP (USA) |
| 2-250OHMPORM30PCT 7/8 IN. SHAFT | Crl Components Inc (USA) |
| 45-250OHMPORM30PCT 7/8 IN. SHAFT | Cts Corp Berne Div Thick Film Products Group (USA) |
| MILR94-4 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 2100-0408 | Agilent Technologies, Inc. Div Agilent Technologies Headquarters (USA) |
| RV2NAYSD251B | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MIL-PRF-94/4 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| RV2NAYSD251A | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5905-00-828-5807 is a Resistor,variable,nonwire Wound,, manufactured by Hewlett-Packard Company Dba HP, classified under FSC 5905 (No Item Name Available). Status: cancelled.
NSN 5905-00-828-5807 has 8 cross-referenced part numbers: 2100-0408 (Hewlett-Packard Company Dba HP), 2-250OHMPORM30PCT 7/8 IN. SHAFT (Crl Components Inc), 45-250OHMPORM30PCT 7/8 IN. SHAFT (Cts Corp Berne Div Thick Film Products Group), MILR94-4 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 2100-0408 (Agilent Technologies, Inc. Div Agilent Technologies Headquarters) and 3 more.
There is 1 known substitute for 5905-00-828-5807: 5905-00-577-9748. Verify interchangeability with system specifications before substitution.
Key specifications for 2100-0408: Body Style: CYLINDRICAL BUSHING MOUNTED; Test Data Document: 81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).; Body Length: 0.453 INCHES NOMINAL IN; Mounting Bushing Length: 0.375 INCHES NOMINAL IN. 28 total characteristics are documented in the Federal Logistics Information System.
NSN 5905-00-828-5807 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.