The Resistor,variable,wire Wound,pre, cataloged under National Stock Number 5905-00-826-8902, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-00-826-8902 |
| Primary Part Number | 10554949-1 |
| Item Name | Resistor,variable,wire Wound,pre |
| FSC / FSG | 5905 / 59 — Resistor |
| Manufacturer | Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate |
| Status | ACTIVE |
| Maximum Running Torque | 2.00 INCH-OUNCES IN |
| Body Diameter | 0.880 INCHES NOMINAL IN |
| Screw Thread Quantity Per Inch | 32.0 |
| Electrical Resistance Per Section | 50.000 KILOHMS SINGLE SECTION |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 105.0 SINGLE SECTION |
| Section Quantity | 1 |
| Shaft Diameter | 0.2498 INCHES NOMINAL IN |
| Function Characteristic Per Section | SINGLE SECTION LINEAR |
| Body Style | CYLINDRICAL BUSHING MOUNTED |
| Function Conformity Tolerance Per Section | -0.50 TO 0.50 SINGLE SECTION |
| Overall Diameter | 1.060 INCHES NOMINAL IN |
| Mounting Method | STANDARD BUSHING |
| Temp Coefficient of Resistance Wire Per Section in Ppm Per Deg Celsius | -20.0 TO 20.0 SINGLE SECTION |
| Terminal Location | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED |
| Shaft Style | ROUND |
| Actuator Type | SINGLE SHAFT |
| Shaft Length | 0.500 INCHES NOMINAL IN |
| Body Length | 1.060 INCHES NOMINAL IN |
| Maximum Stop Torque | 48.00 INCH-OUNCES IN |
| Power Dissipation Rating Per Section in Watts | 2.0 FREE AIR SINGLE SECTION |
| Screw Thread Diameter | 0.375 INCHES NOMINAL IN |
| Reliability Indicator | NOT ESTABLISHED |
| Screw Thread Series Designator | UNEF |
| Test Data Document | 89661-128C576410 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| Resistance Tolerance Per Section in Percent | -5.0 TO 5.0 SINGLE SECTION |
| Terminal Type and Quantity | 2 TAB, SOLDER LUG |
| Function Conformity Per Section | SINGLE SECTION INDEPENDENT LINEARITY |
| Mounting Bushing Length | 0.310 INCHES NOMINAL IN |
| Ambient Temp in Deg Celsius Per Section at Full Rated Power | 25.0 SINGLE SECTION |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 3507S1-503 | Subminiature Instruments Corp. (USA) |
| 10554949-1 PRIMARY | Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate (USA) |
| Reference | Meaning |
|---|---|
| A43684-009 | 5/2 Secondary reference U.S. Government activity |
| 3507S1-503 | 5/9 Secondary reference U.S. Government activity |
| 128C576H10 | 7/9 Vendor item drawing reference U.S. Government activity |
| 128C576H10 | 7/2 Vendor item drawing reference Northrop Grumman Support Services Corp |
| 3590S-2-503 | 5/9 Secondary reference U.S. Government activity |
NSN 5905-00-826-8902 is a Resistor,variable,wire Wound,pre, manufactured by Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate, classified under FSC 5905, Resistor. Status: active.
NSN 5905-00-826-8902 has 2 manufacturer part numbers on file: 3507S1-503 (Subminiature Instruments Corp.), 10554949-1 (Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate).
Key specifications for 10554949-1: Maximum Running Torque: 2.00 INCH-OUNCES IN; Body Diameter: 0.880 INCHES NOMINAL IN; Screw Thread Quantity Per Inch: 32.0; Electrical Resistance Per Section: 50.000 KILOHMS SINGLE SECTION. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.