The Resistor,variable,wire Wound,pre, cataloged under National Stock Number 5905-00-816-4351, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. Government technical data includes 29 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-00-816-4351 |
| Item Name | Resistor,variable,wire Wound,pre |
| FSC / FSG | 5905 / 59 — Resistor |
| Status | ACTIVE |
| Maximum Running Torque | 2.50 INCH-OUNCES IN |
| Body Diameter | 2.000 INCHES NOMINAL IN |
| Screw Thread Quantity Per Inch | 32.0 |
| Electrical Resistance Per Section | 2.5 KILOHMS SINGLE SECTION |
| Mounting Lip Depth | 0.0620 INCHES NOMINAL IN |
| Undercut Width | 0.0620 INCHES NOMINAL IN |
| Section Quantity | 1 |
| Mounting Facility Quantity | 3 |
| Shaft Diameter | 0.250 INCHES NOMINAL IN |
| Undercut Diameter | 1.820 INCHES MAXIMUM IN |
| Function Characteristic Per Section | SINGLE SECTION LINEAR |
| Body Style | CYLINDRICAL SERVO MOUNTED |
| Function Conformity Tolerance Per Section | -0.15 TO 0.15 SINGLE SECTION |
| Overall Diameter | 1.820 INCHES NOMINAL IN |
| Mounting Hole/stud Circle Diameter | 1.250 INCHES NOMINAL IN |
| Angle Between Centerlines of Mounting Holes in Deg | 120.0 |
| Mounting Method | CLAMP RING(S) AND THREADED HOLE(S) |
| Maximum Starting Torque | 3.50 INCH-OUNCES IN |
| Terminal Location | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED |
| Mounting Lip Diameter | 1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM IN |
| Features Provided | NONMETALLIC SHAFT |
| Shaft Style | ROUND, HOLLOWED, SLOTTED |
| Angle of Mounting Hole in Deg | 30.0 |
| Actuator Type | SINGLE SHAFT |
| Shaft Length | 1.188 INCHES NOMINAL IN |
| Pilot Diameter | 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN |
| Body Length | 4.234 INCHES NOMINAL IN |
| Pilot Length | 0.0620 INCHES NOMINAL IN |
| Power Dissipation Rating Per Section in Watts | 5.0 FREE AIR SINGLE SECTION |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 828529 | 3/9 Design control — primary reference L3 Aviation Products, Inc. Dba L3 Technologies |
NSN 5905-00-816-4351 is a Resistor,variable,wire Wound,pre, classified under FSC 5905, Resistor. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5340-01-689-2285. Verify interchangeability with system specifications before substitution.
Key specifications for 5905-00-816-4351: Maximum Running Torque: 2.50 INCH-OUNCES IN; Body Diameter: 2.000 INCHES NOMINAL IN; Screw Thread Quantity Per Inch: 32.0; Electrical Resistance Per Section: 2.5 KILOHMS SINGLE SECTION. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.