The Resistor,variable,wire Wound,non, cataloged under National Stock Number 5905-00-806-4509, is classified within Federal Supply Class 5905 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Ohmite Holding, L.l.c. Dba Ohmite Manufacturing. Government technical data includes 30 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 9 commercial cross-references from 4 manufacturers, enabling identification through both NSN and commercial part number lookups. 2 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 5905-00-806-4509 |
| Primary Part Number | 0461 |
| Item Name | Resistor,variable,wire Wound,non |
| FSC / FSG | 5905 / 59 — No Item Name Available |
| Manufacturer | Ohmite Holding, L.l.c. Dba Ohmite Manufacturing |
| Status | CANCELLED |
| Body Length | 1.780 INCHES NOMINAL IN |
| Overall Diameter | 3.785 INCHES NOMINAL IN |
| Nonturn Device Radius | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 340.0 SINGLE SECTION |
| Electrical Resistance Per Section | 5.000 KILOHMS SINGLE SECTION |
| Actuator Travel Control Feature | STOPS |
| Ambient Temp in Deg Celsius Per Section at Full Rated Power | 25.0 SINGLE SECTION |
| Terminal Location | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED |
| Power Dissipation Rating Per Section in Watts | 100.0 HEAT SINK SINGLE SECTION |
| Test Data Document | 81349-MILR22-8 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Terminal Type and Quantity | 3 TAB, SOLDER LUG |
| Resistance Tolerance Per Section in Percent | -10.0 TO 10.0 SINGLE SECTION |
| Flat Height | 0.211 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN |
| Mounting Method | STANDARD BUSHING |
| Shaft Style | ROUND, FLATTED |
| First Flat Length | 0.344 INCHES NOMINAL IN |
| Screw Thread Diameter | 0.375 INCHES NOMINAL IN |
| Maximum Starting Torque | 48.00 INCH-OUNCES IN |
| Screw Thread Quantity Per Inch | 32.0 |
| Section Quantity | 1 |
| Maximum Stop Torque | 240.00 INCH-OUNCES IN |
| Body Style | CYLINDRICAL BUSHING MOUNTED |
| Screw Thread Series Designator | UNEF |
| Nonturn Device Location | AT 12 OCLOCK |
| Body Diameter | 3.190 INCHES NOMINAL IN |
| Reliability Indicator | NOT ESTABLISHED |
| Rotary Actuator Travel in Angular Deg | 295.0 MINIMUM AND 315.0 MAXIMUM |
| Mounting Bushing Length | 0.328 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN |
| Shaft Length | 0.828 INCHES MINIMUM AND 0.922 INCHES MAXIMUM IN |
| Actuator Type | SINGLE SHAFT |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 0461 | Ohmite Holding, L.l.c. Dba Ohmite Manufacturing (USA) |
| RE1297 | Aurora Bronze and Aluminum Co (USA) |
| MIL-PRF-22/8 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| RP251FD502KK | Ohmite Holding, L.l.c. Dba Ohmite Manufacturing (USA) |
| M22/08-00261FD | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MILR22-8 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| K046 | Ohmite Holding, L.l.c. Dba Ohmite Manufacturing (USA) |
| RP251FD502KK | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 44B251429PC15 | General Electric Co Semi-Conductor Products Dept (USA) |
NSN 5905-00-806-4509 is a Resistor,variable,wire Wound,non, manufactured by Ohmite Holding, L.l.c. Dba Ohmite Manufacturing, classified under FSC 5905 (No Item Name Available). Status: cancelled.
NSN 5905-00-806-4509 has 9 cross-referenced part numbers: 0461 (Ohmite Holding, L.l.c. Dba Ohmite Manufacturing), RE1297 (Aurora Bronze and Aluminum Co), MIL-PRF-22/8 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), RP251FD502KK (Ohmite Holding, L.l.c. Dba Ohmite Manufacturing), M22/08-00261FD (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M) and 4 more.
There are 2 known substitutes for 5905-00-806-4509: 5999-00-574-4403, 2540-01-314-1190. Verify interchangeability with system specifications before substitution.
Key specifications for 0461: Body Length: 1.780 INCHES NOMINAL IN; Overall Diameter: 3.785 INCHES NOMINAL IN; Nonturn Device Radius: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN; Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 340.0 SINGLE SECTION. 30 total characteristics are documented in the Federal Logistics Information System.
NSN 5905-00-806-4509 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.