PartsTable TECHNICAL DATA SHEET
NSN 5905-00-782-7388Government record, cited

Resistor, Variable, Nonwire Wound,5905-00-782-7388

NSN 5905-00-782-7388 · NIIN 007827388 · Part number 6153-8-1
Bi Technologies Corporation Div Bi Technologies Corp. · FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components · CAGE 73138
Government record, cited
NSN 5905-00-782-7388 — this item is cataloged by the U.S. Government under National Stock Number 5905-00-782-7388. Manufacturer of record part number: 6153-8-1.
Also searched as  5905-00-782-7388 · 5905007827388 · NIIN 007827388 · 00-782-7388 · FSC 5905 Resistor · CAGE 73138 · 6153-8-1 · C603100295
Nearby stock numbers  ·
Features
  • Resistor,variable,nonwire Wound, — FSC 5905
  • Maximum Running Torque: 0.50 INCH-OUNCES IN
  • Body Diameter: 0.891 INCHES NOMINAL IN
  • Lateral Runout: 0.002 INCHES IN
  • Electrical Resistance Per Section: 400.0 OHMS SINGLE SECTION
  • Mounting Lip Depth: 0.0620 INCHES NOMINAL IN
  • Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 125.0 SINGLE SECTION
  • Undercut Width: 0.0620 INCHES NOMINAL IN
Identification
  • NSN: 5905-00-782-7388
  • NIIN: 007827388
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: 6153-8-1
  • Manufacturer: Bi Technologies Corporation Div Bi Technologies Corp.
General Description

The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-00-782-7388, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Bi Technologies Corporation Div Bi Technologies Corp.. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-00-782-7388
Primary Part Number6153-8-1
Item NameResistor,variable,nonwire Wound,
FSC / FSG5905 / 59 — Resistor
ManufacturerBi Technologies Corporation Div Bi Technologies Corp.
StatusACTIVE
Maximum Running Torque0.50 INCH-OUNCES IN
Body Diameter0.891 INCHES NOMINAL IN
Lateral Runout0.002 INCHES IN
Electrical Resistance Per Section400.0 OHMS SINGLE SECTION
Mounting Lip Depth0.0620 INCHES NOMINAL IN
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power125.0 SINGLE SECTION
Undercut Width0.0620 INCHES NOMINAL IN
Section Quantity1
Shaft Diameter0.1245 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM IN
Undercut Diameter0.781 INCHES MAXIMUM IN
Function Characteristic Per SectionSINGLE SECTION LINEAR
Body StyleCYLINDRICAL SERVO MOUNTED
Function Conformity Tolerance Per Section-0.50 TO 0.50 SINGLE SECTION
Overall Diameter1.070 INCHES NOMINAL IN
Mounting MethodCLAMP RING(S)
Maximum Starting Torque0.50 INCH-OUNCES IN
Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius-500.0 TO 500.0 SINGLE SECTION
Terminal LocationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
Mounting Lip Diameter0.8750 INCHES NOMINAL IN
Features ProvidedNONMETALLIC SHAFT
Shaft StyleROUND, SLOTTED
Actuator TypeSINGLE SHAFT
Shaft Length0.500 INCHES NOMINAL IN
Pilot Diameter0.7500 INCHES NOMINAL IN
Body Length0.500 INCHES NOMINAL IN
Shaft Runout0.001 INCHES IN
Pilot Length0.0620 INCHES NOMINAL IN
Power Dissipation Rating Per Section in Watts1.0 FREE AIR SINGLE SECTION
Effective Electrical Rotation in Deg Angular Rotation348.0 NOMINAL
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
6153-8-1 Bi Technologies Corporation Div Bi Technologies Corp. (USA)
Reference documents
ReferenceMeaning
C603100295 3/2 Design control — primary reference
U.S. Government activity

Frequently Asked Questions

What is NSN 5905-00-782-7388?

NSN 5905-00-782-7388 is a Resistor,variable,nonwire Wound,, manufactured by Bi Technologies Corporation Div Bi Technologies Corp., classified under FSC 5905, Resistor. Status: active.

What part numbers are listed for NSN 5905-00-782-7388?

NSN 5905-00-782-7388 has 1 manufacturer part number on file: 6153-8-1 (Bi Technologies Corporation Div Bi Technologies Corp.).

What are the specifications of 6153-8-1?

Key specifications for 6153-8-1: Maximum Running Torque: 0.50 INCH-OUNCES IN; Body Diameter: 0.891 INCHES NOMINAL IN; Lateral Runout: 0.002 INCHES IN; Electrical Resistance Per Section: 400.0 OHMS SINGLE SECTION. 29 specifications are documented in the U.S. Government catalog.

Is NSN 5905-00-782-7388 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com