The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-00-655-3404, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. Government technical data includes 29 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-00-655-3404 |
| Item Name | Resistor,variable,nonwire Wound, |
| FSC / FSG | 5905 / 59 — Resistor |
| Status | ACTIVE |
| Body Diameter | 0.890 INCHES MINIMUM AND 0.922 INCHES MAXIMUM IN |
| Screw Thread Quantity Per Inch | 32.0 |
| Electrical Resistance Per Section | 350.0 KILOHMS SINGLE SECTION |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 120.0 SINGLE SECTION |
| Section Quantity | 1 |
| Shaft Diameter | 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN |
| Nonturn Device Radius | 0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN |
| Body Style | CYLINDRICAL BUSHING MOUNTED |
| Overall Diameter | 0.890 INCHES MINIMUM AND 0.922 INCHES MAXIMUM IN |
| Mounting Method | STANDARD BUSHING |
| Maximum Starting Torque | 6.00 INCH-OUNCES IN |
| Terminal Location | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| Shaft Style | ROUND, SLOTTED |
| Actuator Type | SINGLE SHAFT |
| Shaft Length | 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN |
| Specification/standard Data | 81349-MIL-R-94/4 GOVERNMENT SPECIFICATION |
| Body Length | 0.437 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN |
| Maximum Stop Torque | 128.00 INCH-OUNCES IN |
| Power Dissipation Rating Per Section in Watts | 1.0 FREE AIR SINGLE SECTION |
| Screw Thread Diameter | 0.375 INCHES NOMINAL IN |
| Reliability Indicator | NOT ESTABLISHED |
| Screw Thread Series Designator | UNEF |
| Actuator Travel Control Feature | STOPS |
| Test Data Document | 81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Resistance Tolerance Per Section in Percent | -10.0 TO 10.0 SINGLE SECTION |
| Terminal Type and Quantity | 3 TAB, SOLDER LUG |
| Rotary Actuator Travel in Angular Deg | 251.0 MINIMUM AND 318.0 MAXIMUM |
| Mounting Bushing Length | 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN |
| Device Design Type | NONTURN AT 9:00 OCLOCKUNABLE TO DECODE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MIL-PRF-94/4 | 4/1 Identification reference U.S. Government activity |
| RV2NAYSD354A | 2/2 Government specification standardization U.S. Government activity |
| MILR94-4 | 5/9 Secondary reference U.S. Government activity |
NSN 5905-00-655-3404 is a Resistor,variable,nonwire Wound,, classified under FSC 5905, Resistor. Status: active.
Key specifications for 5905-00-655-3404: Body Diameter: 0.890 INCHES MINIMUM AND 0.922 INCHES MAXIMUM IN; Screw Thread Quantity Per Inch: 32.0; Electrical Resistance Per Section: 350.0 KILOHMS SINGLE SECTION; Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 120.0 SINGLE SECTION. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.