The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-00-646-5957, is classified within Federal Supply Class 5905 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Rockwell Automation, Inc. Dba Rockwell Automation. Government technical data includes 29 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 35 commercial cross-references from 13 manufacturers, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 5905-00-646-5957 |
| Primary Part Number | JA1N032S103UA |
| Item Name | Resistor,variable,nonwire Wound, |
| FSC / FSG | 5905 / 59 — No Item Name Available |
| Manufacturer | Rockwell Automation, Inc. Dba Rockwell Automation |
| Status | CANCELLED |
| Overall Diameter | 1.515 INCHES MAXIMUM IN |
| Mounting Bushing Length | 0.344 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN |
| Reliability Indicator | NOT ESTABLISHED |
| Terminal Type and Quantity | 3 TAB, SOLDER LUG |
| Actuator Travel Control Feature | STOPS |
| Actuator Type | SINGLE SHAFT |
| Rotary Actuator Travel in Angular Deg | 309.0 MINIMUM AND 320.0 MAXIMUM |
| Nonturn Device Radius | 0.515 INCHES MINIMUM AND 0.547 INCHES MAXIMUM IN |
| Mounting Method | STANDARD BUSHING |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 120.0 SINGLE SECTION |
| Screw Thread Quantity Per Inch | 32.0 |
| Device Design Type | NONTURN AT 9:00 OCLOCKUNABLE TO DECODE |
| Screw Thread Series Designator | UNEF |
| Screw Thread Diameter | 0.375 INCHES NOMINAL IN |
| Electrical Resistance Per Section | 10.0 KILOHMS SINGLE SECTION |
| Power Dissipation Rating Per Section in Watts | 2.0 FREE AIR SINGLE SECTION |
| Specification/standard Data | 81349-MIL-R-94/5 GOVERNMENT SPECIFICATION |
| Terminal Location | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| Body Diameter | 1.032 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN |
| Shaft Length | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN |
| Resistance Tolerance Per Section in Percent | -10.0 TO 10.0 SINGLE SECTION |
| Shaft Style | ROUND, SLOTTED |
| Shaft Diameter | 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN |
| Body Length | 0.468 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN |
| Section Quantity | 1 |
| Maximum Stop Torque | 128.00 INCH-OUNCES IN |
| Ambient Temp in Deg Celsius Per Section at Full Rated Power | 70.0 SINGLE SECTION |
| Maximum Starting Torque | 6.00 INCH-OUNCES IN |
| Test Data Document | 81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| JA1N032S103UA | Rockwell Automation, Inc. Dba Rockwell Automation (USA) |
| 1921 | Ballantine Laboratories Inc (USA) |
| 730604 | Bae Systems Information and Electronic Systems Integration Inc. (USA) |
| 716491-02 | Lockheed Martin Corporation Div Rms - Mitchel Field (USA) |
| 1100 0022 | Ge Avio Srl (ITA) |
| 4600-16 | Northrop Grumman Systems Corporation Div Es Defensive Systems Division (USA) |
| 36103000 | Clarostat Sensors and Controls (USA) |
| BA99280 | Smiths Detection Inc. Dba Smiths Detection Inc Casc (USA) |
| JA1R032S103MJ | Rockwell Automation, Inc. Dba Rockwell Automation (USA) |
| CJP4040A03U | Rockwell Automation, Inc. Dba Rockwell Automation (USA) |
| JA1N040S103UZ | Rockwell Automation, Inc. Dba Rockwell Automation (USA) |
| JA1N200P103UA | Rockwell Automation, Inc. Dba Rockwell Automation (USA) |
| JA1N036S103UA | Rockwell Automation, Inc. Dba Rockwell Automation (USA) |
| RV4NAXSB103B | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| SP-RE-003-4 | Gould Inc Simulation Systems Div (USA) |
| 1100 022 | Ge Avio Srl (ITA) |
| RV4NATSB103A | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| JA1N040P103UA | Rockwell Automation, Inc. Dba Rockwell Automation (USA) |
| 36103000 | Kollmorgen Corp Macbeth Div (USA) |
| JAIR032S103JM | Rockwell Automation, Inc. Dba Rockwell Automation (USA) |
NSN 5905-00-646-5957 is a Resistor,variable,nonwire Wound,, manufactured by Rockwell Automation, Inc. Dba Rockwell Automation, classified under FSC 5905 (No Item Name Available). Status: cancelled.
NSN 5905-00-646-5957 has 35 cross-referenced part numbers: JA1N032S103UA (Rockwell Automation, Inc. Dba Rockwell Automation), 1921 (Ballantine Laboratories Inc), 730604 (Bae Systems Information and Electronic Systems Integration Inc.), 716491-02 (Lockheed Martin Corporation Div Rms - Mitchel Field), 1100 0022 (Ge Avio Srl) and 30 more.
There are 12 known substitutes for 5905-00-646-5957: 5905-00-107-8206, 5905-00-257-8343, 5905-00-259-7697 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for JA1N032S103UA: Overall Diameter: 1.515 INCHES MAXIMUM IN; Mounting Bushing Length: 0.344 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN; Reliability Indicator: NOT ESTABLISHED; Terminal Type and Quantity: 3 TAB, SOLDER LUG. 30 total characteristics are documented in the Federal Logistics Information System.
NSN 5905-00-646-5957 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.