The Resistor,variable,wire Wound,pre, cataloged under National Stock Number 5905-00-617-9554, is classified within Federal Supply Class 5905 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Lockheed Martin Corporation Div Rms - Mitchel Field. Government technical data includes 30 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 5 commercial cross-references from 5 manufacturers, enabling identification through both NSN and commercial part number lookups. 6 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-00-617-9554 |
| Primary Part Number | 62-716 |
| Item Name | Resistor,variable,wire Wound,pre |
| FSC / FSG | 5905 / 59 — No Item Name Available |
| Manufacturer | Lockheed Martin Corporation Div Rms - Mitchel Field |
| Status | ACTIVE |
| Undercut Width | 0.0730 INCHES MINIMUM IN |
| Undercut Diameter | 1.453 INCHES MAXIMUM IN |
| Shaft Radial Play | 0.002 INCHES IN |
| Maximum Starting Torque | 1.60 INCH-OUNCES IN |
| Pilot Diameter Runout | 0.00200 INCHES IN |
| Actuator Type | DOUBLE ENDED SHAFT |
| Lateral Runout | 0.002 INCHES IN |
| Shaft Runout | 0.002 INCHES IN |
| Shaft End Play | 0.00500 INCHES IN |
| Maximum Running Torque | 1.10 INCH-OUNCES IN |
| Effective Electrical Rotation in Deg Angular Rotation | 354.0 NOMINAL |
| Actuator Travel Control Feature | CONTINUOUS MOTION |
| Function Conformity Per Section | ALL SECTIONS INDEPENDENT LINEARITY |
| Function Characteristic Per Section | ALL SECTIONS LINEAR |
| Power Dissipation Rating Per Section in Watts | 2.0 FREE AIR ALL SECTIONS |
| Temp Coefficient of Resistance Wire Per Section in Ppm Per Deg Celsius | -20.0 TO 20.0 ALL SECTIONS |
| Precious Material | GOLD |
| Precious Material and Location | TERMINALS GOLD |
| Fixed Tap Quantity Per Section | 1 ALL SECTIONS |
| Ambient Temp in Deg Celsius Per Section at Full Rated Power | 40.0 ALL SECTIONS |
| Tap Location Tolerance Per Section | -1.0 TO 1.0 DEG ANGULAR ROTATION ALL SECTIONS |
| Resistance Tolerance Per Section in Percent | -1.0 TO 1.0 ALL SECTIONS |
| Terminal Type and Quantity | 8 SOLDER STUD |
| Terminal Location | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED |
| Shaft Diameter | 0.250 INCHES NOMINAL IN |
| Tap Location From Ccw Terminal Per Section in Deg of Effective Electrical Rotation | 177.0 ALL SECTIONS |
| Mounting Method | CLAMP RING(S) |
| Shaft Style | ROUND, SLOTTED |
| Bearing Type | BALL SHAFT |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 105.0 ALL SECTIONS |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 170-213 | Vishay Sprague Inc (USA) |
| 170-213 | IV-Electronic Klaus Vespermann Kg (DEU) |
| 62-716 PRIMARY | Lockheed Martin Corporation Div Rms - Mitchel Field (USA) |
| 749-6037 | Bunker Ramo Corp Amphenol Controls Div (USA) |
| 1277397 | Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier (USA) |
NSN 5905-00-617-9554 is a Resistor,variable,wire Wound,pre, manufactured by Lockheed Martin Corporation Div Rms - Mitchel Field, classified under FSC 5905 (No Item Name Available). Status: active.
NSN 5905-00-617-9554 has 5 cross-referenced part numbers: 170-213 (Vishay Sprague Inc), 170-213 (IV-Electronic Klaus Vespermann Kg), 62-716 (Lockheed Martin Corporation Div Rms - Mitchel Field), 749-6037 (Bunker Ramo Corp Amphenol Controls Div), 1277397 (Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier).
There are 6 known substitutes for 5905-00-617-9554: 5962-00-428-2637, 5950-00-451-4216, 5950-00-681-1836 and 3 more. Verify interchangeability with system specifications before substitution.
Key specifications for 62-716: Undercut Width: 0.0730 INCHES MINIMUM IN; Undercut Diameter: 1.453 INCHES MAXIMUM IN; Shaft Radial Play: 0.002 INCHES IN; Maximum Starting Torque: 1.60 INCH-OUNCES IN. 30 total characteristics are documented in the Federal Logistics Information System.