The Resistor,variable,wire Wound,pre, cataloged under National Stock Number 5905-00-605-6775, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Servo Instrument Corporation. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-00-605-6775 |
| Primary Part Number | 741-3065A |
| Item Name | Resistor,variable,wire Wound,pre |
| FSC / FSG | 5905 / 59 — Resistor |
| Manufacturer | Servo Instrument Corporation |
| Status | ACTIVE |
| Body Diameter | 1.000 INCHES NOMINAL IN |
| Lateral Runout | 0.001 INCHES IN |
| Electrical Resistance Per Section | 70.0 KILOHMS 1ST SECTION AND 2.0 KILOHMS 2ND SECTION |
| Mounting Lip Depth | 0.0570 INCHES MINIMUM IN |
| Switch Voltage Rating in Volts | 125.0 |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 15.0 ALL SECTIONS |
| Undercut Width | 0.0670 INCHES MINIMUM IN |
| Section Quantity | 2 |
| Shaft Diameter | 0.125 INCHES NOMINAL IN |
| Undercut Diameter | 0.968 INCHES MINIMUM AND 0.9688 INCHES MAXIMUM IN |
| Switch Operating Position | START OF ROTATION |
| Function Characteristic Per Section | ALL SECTIONS LINEAR |
| Body Style | CYLINDRICAL SERVO MOUNTED |
| Function Conformity Tolerance Per Section | -0.20 TO 0.20 ALL SECTIONS |
| Shaft End Play | 0.005 INCHES IN |
| Mounting Method | CLAMP RING(S) |
| Maximum Starting Torque | 0.45 INCH-OUNCES IN |
| Temp Coefficient of Resistance Wire Per Section in Ppm Per Deg Celsius | -20.0 TO 20.0 ALL SECTIONS |
| Fixed Tap Quantity Per Section | 1 ALL SECTIONS |
| Terminal Location | REAR-BOTTOM LOCATION NOT OTHERWISE SPECIFIED |
| Mounting Lip Diameter | 1.0620 INCHES NOMINAL IN |
| Features Provided | SWITCH |
| Shaft Style | ROUND, FLUTED |
| Actuator Type | SINGLE SHAFT |
| Shaft Length | 0.500 INCHES NOMINAL IN |
| Pilot Diameter | 0.9683 INCHES MINIMUM AND 0.9688 INCHES MAXIMUM IN |
| Body Length | 2.125 INCHES NOMINAL IN |
| Shaft Runout | 0.002 INCHES IN |
| Pilot Length | 0.0620 INCHES NOMINAL IN |
| Tap Location Tolerance Per Section | -0.25 TO 0.25 DEG ANGULAR ROTATION ALL SECTIONS |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 741-3065A | Servo Instrument Corporation (USA) |
| Reference | Meaning |
|---|---|
| 940219-306 | 3/2 Design control — primary reference U.S. Government activity |
| 741-3065A | 5/9 Secondary reference Bunker Ramo Corp Amphenol Controls Div |
| 70-05-0592 | 5/1 Secondary reference Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) |
NSN 5905-00-605-6775 is a Resistor,variable,wire Wound,pre, manufactured by Servo Instrument Corporation, classified under FSC 5905, Resistor. Status: active.
NSN 5905-00-605-6775 has 1 manufacturer part number on file: 741-3065A (Servo Instrument Corporation).
Key specifications for 741-3065A: Body Diameter: 1.000 INCHES NOMINAL IN; Lateral Runout: 0.001 INCHES IN; Electrical Resistance Per Section: 70.0 KILOHMS 1ST SECTION AND 2.0 KILOHMS 2ND SECTION; Mounting Lip Depth: 0.0570 INCHES MINIMUM IN. 30 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.