The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-00-593-9471, is classified within Federal Supply Class 5905 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 26 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-00-593-9471 |
| Primary Part Number | MILR39035-2 |
| Item Name | Resistor,variable,nonwire Wound, |
| FSC / FSG | 5905 / 59 — No Item Name Available |
| Manufacturer | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| Status | ACTIVE |
| Center to Center Distance Between Terminals | 0.200 INCHES NOMINAL IN |
| Body Length | 0.375 INCHES NOMINAL IN |
| Specification/standard Data | 81349-MIL-R-39035/2 GOVERNMENT SPECIFICATION |
| Test Data Document | 81349-MIL-R-39035 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Terminal Type and Quantity | 3 PIN |
| Shaft Style | ROUND, SLOTTED |
| Reliability Failure Rate Level in Percent | 0.100 |
| Body Width | 0.170 INCHES NOMINAL IN |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 150.0 SINGLE SECTION |
| Center to Center Distance Between Terminal Rows | 0.100 INCHES NOMINAL IN |
| Center to Center Distance Between Center Terminal and Outside Terminal | 0.100 INCHES NOMINAL IN |
| Reliability Indicator | ESTABLISHED |
| Mounting Method | TERMINAL |
| Terminal Location | LEFT ADJACENT SIDE TWO ROWS |
| Electrical Resistance Per Section | 1.0 KILOHMS SINGLE SECTION |
| Resistance Tolerance Per Section in Percent | -10.0 TO 10.0 SINGLE SECTION |
| Shaft Length | 0.080 INCHES MAXIMUM IN |
| Power Dissipation Rating Per Section in Watts | 0.5 FREE AIR SINGLE SECTION |
| Ambient Temp in Deg Celsius Per Section at Full Rated Power | 85.0 SINGLE SECTION |
| Terminal Length | 0.300 INCHES MINIMUM IN |
| Body Style | RECTANGULAR |
| Shaft Diameter | 0.075 INCHES NOMINAL IN |
| Actuator Type | SINGLE SHAFT |
| Section Quantity | 1 |
| Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius | -100.0 TO 100.0 SINGLE SECTION |
| Body Height | 0.375 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MILR39035-2 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| RJR24CP102 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| RJR24FP102P | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5905-00-593-9471 is a Resistor,variable,nonwire Wound,, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5905 (No Item Name Available). Status: active.
NSN 5905-00-593-9471 has 3 cross-referenced part numbers: MILR39035-2 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), RJR24CP102 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), RJR24FP102P (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There is 1 known substitute for 5905-00-593-9471: 5905-01-200-3932. Verify interchangeability with system specifications before substitution.
Key specifications for MILR39035-2: Center to Center Distance Between Terminals: 0.200 INCHES NOMINAL IN; Body Length: 0.375 INCHES NOMINAL IN; Specification/standard Data: 81349-MIL-R-39035/2 GOVERNMENT SPECIFICATION; Test Data Document: 81349-MIL-R-39035 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).. 26 total characteristics are documented in the Federal Logistics Information System.