The Resistor,variable,wire Wound,pre, cataloged under National Stock Number 5905-00-593-8074, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. Government technical data includes 29 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-00-593-8074 |
| Item Name | Resistor,variable,wire Wound,pre |
| FSC / FSG | 5905 / 59 — Resistor |
| Status | ACTIVE |
| Maximum Running Torque | 1.50 INCH-OUNCES IN |
| Body Diameter | 3.000 INCHES NOMINAL IN |
| Screw Thread Quantity Per Inch | 32.0 |
| Lateral Runout | 0.001 INCHES IN |
| Electrical Resistance Per Section | 56.000 KILOHMS SINGLE SECTION |
| Mounting Lip Depth | 0.09300 INCHES NOMINAL IN |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 105.0 SINGLE SECTION |
| Undercut Width | 0.07800 INCHES NOMINAL IN |
| Section Quantity | 1 |
| Mounting Facility Quantity | 3 |
| Shaft Diameter | 0.2495 INCHES NOMINAL IN |
| Undercut Diameter | 2.875 INCHES NOMINAL IN |
| Function Characteristic Per Section | SINGLE SECTION LINEAR |
| Body Style | CYLINDRICAL SERVO MOUNTED |
| Function Conformity Tolerance Per Section | -0.25 TO 0.25 SINGLE SECTION |
| Shaft End Play | 0.00500 INCHES IN |
| Overall Diameter | 3.390 INCHES NOMINAL IN |
| Mounting Hole/stud Circle Diameter | 1.750 INCHES NOMINAL IN |
| Angle Between Centerlines of Mounting Holes in Deg | 120.0 |
| Mounting Method | THREADED HOLE(S) |
| Maximum Starting Torque | 2.00 INCH-OUNCES IN |
| Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius | -20.0 TO 20.0 SINGLE SECTION |
| Terminal Location | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED |
| Mounting Lip Diameter | 3.00000 INCHES NOMINAL IN |
| Shaft Style | ROUND |
| Angle of Mounting Hole in Deg | 90.0 |
| Actuator Type | SINGLE SHAFT |
| Shaft Length | 0.469 INCHES NOMINAL IN |
| Pilot Diameter | 2.87500 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 9741100 | 5/9 Secondary reference General Electric Company |
| 688065PC1 | 3/9 Design control — primary reference Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier |
NSN 5905-00-593-8074 is a Resistor,variable,wire Wound,pre, classified under FSC 5905, Resistor. Status: active.
Key specifications for 5905-00-593-8074: Maximum Running Torque: 1.50 INCH-OUNCES IN; Body Diameter: 3.000 INCHES NOMINAL IN; Screw Thread Quantity Per Inch: 32.0; Lateral Runout: 0.001 INCHES IN. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.