The Resistor,variable,wire Wound,non, cataloged under National Stock Number 5905-00-581-7426, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. Government technical data includes 29 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-00-581-7426 |
| Item Name | Resistor,variable,wire Wound,non |
| FSC / FSG | 5905 / 59 — Resistor |
| Status | ACTIVE |
| Body Diameter | 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN |
| Lateral Runout | 0.002 INCHES IN |
| Electrical Resistance Per Section | 50.0 KILOHMS SINGLE SECTION |
| Mounting Lip Depth | 0.0520 INCHES MINIMUM AND 0.0720 INCHES MAXIMUM IN |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 80.0 SINGLE SECTION |
| Undercut Width | 0.0630 INCHES NOMINAL IN |
| Section Quantity | 1 |
| Shaft Diameter | 1.247 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN |
| Undercut Diameter | 0.958 INCHES MINIMUM AND 0.978 INCHES MAXIMUM IN |
| Body Style | CYLINDRICAL SERVO MOUNTED |
| Shaft End Play | 0.005 INCHES IN |
| Overall Diameter | 1.134 INCHES NOMINAL IN |
| Mounting Method | CLAMP RING(S) |
| Terminal Location | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED |
| Mounting Lip Diameter | 1.0520 INCHES MINIMUM AND 1.0720 INCHES MAXIMUM IN |
| Shaft Style | ROUND |
| Actuator Type | DOUBLE ENDED SHAFT |
| Shaft Length | 0.625 INCHES NOMINAL IN |
| Pilot Diameter | 0.9683 INCHES MINIMUM AND 0.9688 INCHES MAXIMUM IN |
| Body Length | 0.685 INCHES NOMINAL IN |
| Shaft Runout | 0.002 INCHES IN |
| Pilot Length | 0.0520 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM IN |
| Power Dissipation Rating Per Section in Watts | 2.0 FREE AIR SINGLE SECTION |
| Pilot Diameter Runout | 0.00100 INCHES IN |
| Reliability Indicator | NOT ESTABLISHED |
| Shaft Radial Play | 0.001 INCHES IN |
| Resistance Tolerance Per Section in Percent | -5.0 TO 5.0 SINGLE SECTION |
| Terminal Type and Quantity | 4 TAB, SOLDER LUG |
| Ambient Temp in Deg Celsius Per Section at Full Rated Power | 25.0 SINGLE SECTION |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 960902-40 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5905-00-581-7426 is a Resistor,variable,wire Wound,non, classified under FSC 5905, Resistor. Status: active.
Key specifications for 5905-00-581-7426: Body Diameter: 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN; Lateral Runout: 0.002 INCHES IN; Electrical Resistance Per Section: 50.0 KILOHMS SINGLE SECTION; Mounting Lip Depth: 0.0520 INCHES MINIMUM AND 0.0720 INCHES MAXIMUM IN. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.