PartsTable TECHNICAL DATA SHEET
NSN 5905-00-539-3341Government record, cited

Resistor, Variable, Wire Wound, Non5905-00-539-3341

NSN 5905-00-539-3341 · NIIN 005393341 · Part number H0158
Ohmite Holding, L.l.c. Dba Ohmite Manufacturing · FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components · CAGE 44655
Government record, cited
NSN 5905-00-539-3341 — this item is cataloged by the U.S. Government under National Stock Number 5905-00-539-3341. Manufacturer of record part number: H0158.
Also searched as  5905-00-539-3341 · 5905005393341 · NIIN 005393341 · 00-539-3341 · FSC 5905 Resistor · CAGE 44655 · H0158 · 62021FF1-60
Nearby stock numbers  ·
Features
  • Resistor,variable,wire Wound,non — FSC 5905
  • Nonturn Device Location: AT 6 OCLOCK
  • Body Diameter: 1.562 INCHES NOMINAL IN
  • Screw Thread Quantity Per Inch: 32.0
  • Electrical Resistance Per Section: 1.000 KILOHMS SINGLE SECTION
  • Switch Voltage Rating in Volts: 125.0
  • Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 340.0 SINGLE SECTION
  • Section Quantity: 1
Identification
  • NSN: 5905-00-539-3341
  • NIIN: 005393341
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: H0158
  • Manufacturer: Ohmite Holding, L.l.c. Dba Ohmite Manufacturing
General Description

The Resistor,variable,wire Wound,non, cataloged under National Stock Number 5905-00-539-3341, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Ohmite Holding, L.l.c. Dba Ohmite Manufacturing. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-00-539-3341
Primary Part NumberH0158
Item NameResistor,variable,wire Wound,non
FSC / FSG5905 / 59 — Resistor
ManufacturerOhmite Holding, L.l.c. Dba Ohmite Manufacturing
StatusACTIVE
Nonturn Device LocationAT 6 OCLOCK
Body Diameter1.562 INCHES NOMINAL IN
Screw Thread Quantity Per Inch32.0
Electrical Resistance Per Section1.000 KILOHMS SINGLE SECTION
Switch Voltage Rating in Volts125.0
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power340.0 SINGLE SECTION
Section Quantity1
Shaft Diameter0.250 INCHES NOMINAL IN
Nonturn Device Radius0.531 INCHES NOMINAL IN
Switch Operating PositionSTART OF ROTATION
Body StyleCYLINDRICAL BUSHING MOUNTED
Overall Diameter1.876 INCHES NOMINAL IN
First Flat Length0.688 INCHES NOMINAL IN
Mounting MethodSTANDARD BUSHING
Terminal LocationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
Features ProvidedSWITCH
Shaft StyleROUND, FLATTED
Actuator TypeSINGLE SHAFT
Shaft Length0.875 INCHES NOMINAL IN
Body Length1.375 INCHES NOMINAL IN
Power Dissipation Rating Per Section in Watts25.0 FREE AIR SINGLE SECTION
Switch TypeROTARY
Effective Electrical Rotation in Deg Angular Rotation300.0 NOMINAL
Screw Thread Diameter0.375 INCHES NOMINAL IN
Reliability IndicatorNOT ESTABLISHED
Screw Thread Series DesignatorUNEF
Actuator Travel Control FeatureSTOPS
Resistance Tolerance Per Section in Percent-10.0 TO 10.0 SINGLE SECTION
Switch Contact ArrangementSINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5130-01-368-4393H0158 POSSIBLE MATCH
BLADE,HOLE SAW
Possible match (shared part number)L.s. Starrett Company (the) Div Tool Division
Cross-Reference Index
Part NumberManufacturer
H0158 Ohmite Holding, L.l.c. Dba Ohmite Manufacturing (USA)
Reference documents
ReferenceMeaning
62021FF1-60 3/9 Design control — primary reference
General Bronze Architectural Products Div of Allied Products Corp
Related Parts
5130-01-368-4393POSSIBLE MATCH
BLADE,HOLE SAW
H0158

Frequently Asked Questions

What is NSN 5905-00-539-3341?

NSN 5905-00-539-3341 is a Resistor,variable,wire Wound,non, manufactured by Ohmite Holding, L.l.c. Dba Ohmite Manufacturing, classified under FSC 5905, Resistor. Status: active.

What part numbers are listed for NSN 5905-00-539-3341?

NSN 5905-00-539-3341 has 1 manufacturer part number on file: H0158 (Ohmite Holding, L.l.c. Dba Ohmite Manufacturing).

What NSN replaces 5905-00-539-3341?

1 possible match (shared part number, not a government interchangeability claim): 5130-01-368-4393. Verify interchangeability with system specifications before substitution.

What are the specifications of H0158?

Key specifications for H0158: Nonturn Device Location: AT 6 OCLOCK; Body Diameter: 1.562 INCHES NOMINAL IN; Screw Thread Quantity Per Inch: 32.0; Electrical Resistance Per Section: 1.000 KILOHMS SINGLE SECTION. 29 specifications are documented in the U.S. Government catalog.

Is NSN 5905-00-539-3341 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com