The Resistor,variable,wire Wound,pre, cataloged under National Stock Number 5905-00-502-6860, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. Government technical data includes 29 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-00-502-6860 |
| Item Name | Resistor,variable,wire Wound,pre |
| FSC / FSG | 5905 / 59 — Resistor |
| Status | ACTIVE |
| Maximum Running Torque | 1.00 INCH-OUNCES IN |
| Body Diameter | 1.062 INCHES MAXIMUM IN |
| Lateral Runout | 0.002 INCHES IN |
| Electrical Resistance Per Section | 100.000 KILOHMS SINGLE SECTION |
| Mounting Lip Depth | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM IN |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 85.0 SINGLE SECTION |
| Undercut Width | 0.0630 INCHES NOMINAL IN |
| Section Quantity | 1 |
| Shaft Diameter | 0.125 INCHES NOMINAL IN |
| Undercut Diameter | 0.963 INCHES MINIMUM AND 0.973 INCHES MAXIMUM IN |
| Function Characteristic Per Section | SINGLE SECTION LINEAR |
| Body Style | CYLINDRICAL SERVO MOUNTED |
| Function Conformity Tolerance Per Section | -0.50 TO 0.50 SINGLE SECTION |
| Shaft End Play | 0.00500 INCHES IN |
| Tap Location From Ccw Terminal Per Section in Ohms | 50000.0 SINGLE SECTION |
| Mounting Method | CLAMP RING(S) |
| Maximum Starting Torque | 1.00 INCH-OUNCES IN |
| Fixed Tap Quantity Per Section | 1 SINGLE SECTION |
| Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius | -40.0 TO 40.0 SINGLE SECTION |
| Terminal Location | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED |
| Mounting Lip Diameter | 1.0570 INCHES MINIMUM AND 1.0670 INCHES MAXIMUM IN |
| Shaft Style | ROUND, SLOTTED |
| Actuator Type | DOUBLE ENDED SHAFT |
| Shaft Length | 0.771 INCHES MINIMUM AND 0.779 INCHES MAXIMUM IN |
| Pilot Diameter | 0.9683 INCHES MINIMUM AND 0.9688 INCHES MAXIMUM IN |
| Body Length | 0.785 INCHES MAXIMUM IN |
| Shaft Runout | 0.001 INCHES IN |
| Pilot Length | 0.0570 INCHES NOMINAL IN |
| Tap Location Tolerance Per Section | -1.5 TO 1.5 DEG ANGULAR ROTATION SINGLE SECTION |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 960902-17 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5905-00-502-6860 is a Resistor,variable,wire Wound,pre, classified under FSC 5905, Resistor. Status: active.
Key specifications for 5905-00-502-6860: Maximum Running Torque: 1.00 INCH-OUNCES IN; Body Diameter: 1.062 INCHES MAXIMUM IN; Lateral Runout: 0.002 INCHES IN; Electrical Resistance Per Section: 100.000 KILOHMS SINGLE SECTION. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.