The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-00-458-4423, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. Government technical data includes 29 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-00-458-4423 |
| Item Name | Resistor,variable,nonwire Wound, |
| FSC / FSG | 5905 / 59 — Resistor |
| Status | ACTIVE |
| Electrical Resistance Per Section | 50.0 OHMS SINGLE SECTION |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 150.0 SINGLE SECTION |
| Section Quantity | 1 |
| Mounting Facility Quantity | 2 |
| Shaft Diameter | 0.115 INCHES NOMINAL IN |
| Fragility Factor | MODERATELY RUGGED |
| Body Style | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| Terminal Length | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN |
| Mounting Method | UNTHREADED HOLE(S) AND TERMINAL |
| Body Width | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN |
| Body Height | 0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN |
| Mounting Hole Diameter | 0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN |
| Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius | -250.0 TO 250.0 SINGLE SECTION |
| Terminal Location | LOWER ADJACENT SIDE SINGLE ROW |
| Center to Center Distance Between Center Terminal and Outside Terminal | 0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN |
| Shaft Style | ROUND, SLOTTED |
| Actuator Type | SINGLE SHAFT |
| Lateral Distance Between Mounting Hole Centers | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM IN |
| Shaft Length | 0.070 INCHES NOMINAL IN |
| Specification/standard Data | 81349-MIL-R-22097/2 GOVERNMENT SPECIFICATION |
| Body Length | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN |
| Center to Center Distance Between Terminals | 0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM IN |
| Power Dissipation Rating Per Section in Watts | 0.75 FREE AIR SINGLE SECTION |
| Reliability Indicator | NOT ESTABLISHED |
| Cubic Measure | 0.079 CUBIC INCHES |
| Actuator Travel Control Feature | CLUTCH |
| Test Data Document | 81349-MIL-R-22097 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Resistance Tolerance Per Section in Percent | -10.0 TO 10.0 SINGLE SECTION |
| Terminal Type and Quantity | 3 PIN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MIL-R-22097/2 | 4/1 Identification reference U.S. Government activity |
| RJ12CP500 | 2/2 Government specification standardization U.S. Government activity |
NSN 5905-00-458-4423 is a Resistor,variable,nonwire Wound,, classified under FSC 5905, Resistor. Status: active.
Key specifications for 5905-00-458-4423: Electrical Resistance Per Section: 50.0 OHMS SINGLE SECTION; Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 150.0 SINGLE SECTION; Section Quantity: 1; Mounting Facility Quantity: 2. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.