PartsTable TECHNICAL DATA SHEET
NSN 5905-00-412-4200Government record, cited

Resistor, Variable, Nonwire Wound,5905-00-412-4200

NSN 5905-00-412-4200 · NIIN 004124200
FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5905-00-412-4200 · 5905004124200 · NIIN 004124200 · 00-412-4200 · FSC 5905 Resistor · MILR23285-2 · RVC5NYD501B · RVC5NYD501B
Nearby stock numbers  ·
Features
  • Resistor,variable,nonwire Wound, — FSC 5905
  • Maximum Running Torque: 0.50 INCH-OUNCES IN
  • Body Diameter: 0.750 INCHES NOMINAL IN
  • Screw Thread Quantity Per Inch: 32.0
  • Electrical Resistance Per Section: 500.0 OHMS SINGLE SECTION
  • Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 175.0 SINGLE SECTION
  • Section Quantity: 1
  • Shaft Diameter: 0.125 INCHES NOMINAL IN
Identification
  • NSN: 5905-00-412-4200
  • NIIN: 004124200
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-00-412-4200, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. Government technical data includes 29 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 3 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-00-412-4200
Item NameResistor,variable,nonwire Wound,
FSC / FSG5905 / 59 — Resistor
StatusACTIVE
Maximum Running Torque0.50 INCH-OUNCES IN
Body Diameter0.750 INCHES NOMINAL IN
Screw Thread Quantity Per Inch32.0
Electrical Resistance Per Section500.0 OHMS SINGLE SECTION
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power175.0 SINGLE SECTION
Section Quantity1
Shaft Diameter0.125 INCHES NOMINAL IN
Nonturn Device Radius0.375 INCHES NOMINAL IN
Body StyleCYLINDRICAL BUSHING MOUNTED
Overall Diameter0.953 INCHES MAXIMUM IN
Terminal Length0.172 INCHES MAXIMUM IN
Mounting MethodSTANDARD BUSHING
Maximum Starting Torque6.00 INCH-OUNCES IN
Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius-250.0 TO 250.0 SINGLE SECTION
Terminal LocationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
Shaft StyleROUND, SLOTTED
Actuator TypeSINGLE SHAFT
Shaft Length0.875 INCHES NOMINAL IN
Specification/standard Data81349-MIL-R-23285/2 GOVERNMENT SPECIFICATION
Body Length0.500 INCHES NOMINAL IN
Maximum Stop Torque80.00 INCH-OUNCES IN
Power Dissipation Rating Per Section in Watts1.0 FREE AIR SINGLE SECTION
Effective Electrical Rotation in Deg Angular Rotation275.0 MINIMUM AND 285.0 MAXIMUM
Screw Thread Diameter0.250 INCHES NOMINAL IN
Reliability IndicatorNOT ESTABLISHED
Screw Thread Series DesignatorUNEF
Actuator Travel Control FeatureSTOPS
Test Data Document81349-MIL-R-23285 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Resistance Tolerance Per Section in Percent-10.0 TO 10.0 SINGLE SECTION
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 3
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5905-00-463-2394 POSSIBLE MATCH
RESISTOR,VARIABLE,NONWIRE WOUND,
Possible match (shared part number)
5905-00-905-9346 POSSIBLE MATCH
RESISTOR,VARIABLE,NONWIRE WOUND,
Possible match (shared part number)
5905-01-065-7964 POSSIBLE MATCH
RESISTOR,VARIABLE,NONWIRE WOUND,
Possible match (shared part number)
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
MILR23285-2 5/9 Secondary reference
U.S. Government activity
RVC5NYD501B 3/9 Design control — primary reference
Cts Corp Berne Div Thick Film Products Group
RVC5NYD501B 5/9 Secondary reference
U.S. Government activity
Related Parts
5905-00-463-2394POSSIBLE MATCH
RESISTOR,VARIABLE,NONWIRE WOUND,
5905-00-905-9346POSSIBLE MATCH
RESISTOR,VARIABLE,NONWIRE WOUND,
5905-01-065-7964POSSIBLE MATCH
RESISTOR,VARIABLE,NONWIRE WOUND,

Frequently Asked Questions

What is NSN 5905-00-412-4200?

NSN 5905-00-412-4200 is a Resistor,variable,nonwire Wound,, classified under FSC 5905, Resistor. Status: active.

What NSN replaces 5905-00-412-4200?

3 possible matches (shared part number, not a government interchangeability claim): 5905-00-463-2394, 5905-00-905-9346, 5905-01-065-7964. Verify interchangeability with system specifications before substitution.

What are the specifications of 5905-00-412-4200?

Key specifications for 5905-00-412-4200: Maximum Running Torque: 0.50 INCH-OUNCES IN; Body Diameter: 0.750 INCHES NOMINAL IN; Screw Thread Quantity Per Inch: 32.0; Electrical Resistance Per Section: 500.0 OHMS SINGLE SECTION. 29 specifications are documented in the U.S. Government catalog.

Is NSN 5905-00-412-4200 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com