PartsTable TECHNICAL DATA SHEET
NSN 5905-00-412-3692Government record, cited

Resistor, Variable, Wire Wound, Non5905-00-412-3692

NSN 5905-00-412-3692 · NIIN 004123692
FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5905-00-412-3692 · 5905004123692 · NIIN 004123692 · 00-412-3692 · FSC 5905 Resistor · RT24C2L102 · MIL-R-27208/9
Nearby stock numbers  ·
Features
  • Resistor,variable,wire Wound,non — FSC 5905
  • Maximum Running Torque: 5.00 INCH-OUNCES IN
  • Electrical Resistance Per Section: 1.0 KILOHMS SINGLE SECTION
  • Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 150.0 SINGLE SECTION
  • Section Quantity: 1
  • Mounting Facility Quantity: 2
  • Shaft Diameter: 0.050 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
  • Fragility Factor: MODERATELY RUGGED
Identification
  • NSN: 5905-00-412-3692
  • NIIN: 004123692
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Resistor,variable,wire Wound,non, cataloged under National Stock Number 5905-00-412-3692, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. Government technical data includes 30 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-00-412-3692
Item NameResistor,variable,wire Wound,non
FSC / FSG5905 / 59 — Resistor
StatusACTIVE
Maximum Running Torque5.00 INCH-OUNCES IN
Electrical Resistance Per Section1.0 KILOHMS SINGLE SECTION
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power150.0 SINGLE SECTION
Section Quantity1
Mounting Facility Quantity2
Shaft Diameter0.050 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
Fragility FactorMODERATELY RUGGED
Body StyleRECTANGULAR W/MOUNTING HOLES
Mounting MethodUNTHREADED HOLE(S)
Body Width0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
Body Height0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
Maximum Starting Torque5.00 INCH-OUNCES IN
Mounting Hole Diameter0.062 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN
Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius-50.0 TO 50.0 SINGLE SECTION
Terminal LocationREAR END LOCATION NOT OTHERWISE SPECIFIED
Shaft StyleROUND, SLOTTED
Actuator TypeSINGLE SHAFT
Lateral Distance Between Mounting Hole Centers0.409 INCHES MINIMUM AND 0.429 INCHES MAXIMUM IN
Shaft Length0.080 INCHES MAXIMUM IN
Specification/standard Data81349-MIL-R-27208/9 GOVERNMENT SPECIFICATION
Body Length0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
Power Dissipation Rating Per Section in Watts0.75 FREE AIR SINGLE SECTION
Effective Electrical Rotation in Deg Angular Rotation5400.0 MINIMUM AND 10800.0 MAXIMUM
Reliability IndicatorNOT ESTABLISHED
Cubic Measure0.024 CUBIC INCHES
Actuator Travel Control FeatureCLUTCH
Test Data Document81349-MIL-R-27208 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Resistance Tolerance Per Section in Percent-5.0 TO 5.0 SINGLE SECTION
Terminal Type and Quantity3 WIRE LEAD
Rotary Actuator Travel in Angular Deg5400.0 MINIMUM AND 10800.0 MAXIMUM
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5905-00-557-3053 POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON
Possible match (shared part number)
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
RT24C2L102 2/2 Government specification standardization
U.S. Government activity
MIL-R-27208/9 4/1 Identification reference
U.S. Government activity
Related Parts
5905-00-557-3053POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON

Frequently Asked Questions

What is NSN 5905-00-412-3692?

NSN 5905-00-412-3692 is a Resistor,variable,wire Wound,non, classified under FSC 5905, Resistor. Status: active.

What NSN replaces 5905-00-412-3692?

1 possible match (shared part number, not a government interchangeability claim): 5905-00-557-3053. Verify interchangeability with system specifications before substitution.

What are the specifications of 5905-00-412-3692?

Key specifications for 5905-00-412-3692: Maximum Running Torque: 5.00 INCH-OUNCES IN; Electrical Resistance Per Section: 1.0 KILOHMS SINGLE SECTION; Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 150.0 SINGLE SECTION; Section Quantity: 1. 30 specifications are documented in the U.S. Government catalog.

Is NSN 5905-00-412-3692 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com