PartsTable TECHNICAL DATA SHEET
JULY 2026Technical Data Sheet

DMS 82080BResistor,variable,wire Wound,non

Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) · NSN 5905-00-375-0183 · FSC 5905 · No Item Name Available
Verified by PartsTable
NSN 5905-00-375-0183 — this item is cataloged by the U.S. Government under National Stock Number 5905-00-375-0183. Primary manufacturer part number: DMS 82080B.
Features
  • Resistor,variable,wire Wound,non — FSC 5905
  • Shaft Diameter: 0.187 INCHES NOMINAL IN
  • Effective Electrical Rotation in Deg Angular Rotation: 290.0 NOMINAL
  • Switch Operating Position: ANY POSITION OF ROTATION TRAVEL
  • Shaft Style: ROUND
  • Body Length: 0.312 INCHES NOMINAL IN
  • Rotary Actuator Travel in Angular Deg: 320.0 NOMINAL
  • Section Quantity: 1
Applications
  • Electrical power distribution
  • Signal transmission
  • Equipment interconnection
  • Circuit regulation and filtering
  • Signal conditioning
General Description

The Resistor,variable,wire Wound,non, cataloged under National Stock Number 5905-00-375-0183, is classified within Federal Supply Class 5905 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings). Government technical data includes 30 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 10 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-00-375-0183
Primary Part NumberDMS 82080B
Item NameResistor,variable,wire Wound,non
FSC / FSG5905 / 59 — No Item Name Available
ManufacturerDla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)
StatusACTIVE
Shaft Diameter0.187 INCHES NOMINAL IN
Effective Electrical Rotation in Deg Angular Rotation290.0 NOMINAL
Switch Operating PositionANY POSITION OF ROTATION TRAVEL
Shaft StyleROUND
Body Length0.312 INCHES NOMINAL IN
Rotary Actuator Travel in Angular Deg320.0 NOMINAL
Section Quantity1
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power100.0 SINGLE SECTION
Features ProvidedPANEL SEAL AND SWITCH
Electrical Resistance Per Section5.0 KILOHMS SINGLE SECTION
Terminal Type and Quantity5 TAB, SOLDER LUG
Ambient Temp in Deg Celsius Per Section at Full Rated Power40.0 SINGLE SECTION
Mounting MethodSTANDARD BUSHING
Resistance Tolerance Per Section in Percent-5.0 TO 5.0 SINGLE SECTION
Actuator Travel Control FeatureSTOPS
Power Dissipation Rating Per Section in Watts1.0 FREE AIR SINGLE SECTION
Switch Current Type and Rating in Amps1.000 AC
Terminal LocationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
Body StyleCYLINDRICAL BUSHING MOUNTED
Mounting Bushing Length0.250 INCHES NOMINAL IN
Screw Thread Series DesignatorUNEF
Nonturn Device LocationAT 9 OCLOCK
Switch TypeROTARY
Shaft Length0.250 INCHES NOMINAL IN
Reliability IndicatorNOT ESTABLISHED
Switch Contact ArrangementSINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED
Screw Thread Diameter0.375 INCHES NOMINAL IN
Switch Voltage Rating in Volts125.0
Body Diameter0.500 INCHES NOMINAL IN
Actuator TypeSINGLE SHAFT
Lifecycle & Compliance
Acquisition StatusACTIVE
HAZMATNo
Verified Substitutes 10
5930-00-201-9890 INTERCHANGEABLE
Switch,rotary
5905-00-234-9863 INTERCHANGEABLE
Resistor,variable,nonwire Wound,
5930-00-240-4230 INTERCHANGEABLE
Switch,push
5905-00-279-4910 INTERCHANGEABLE
Resistor,variable,nonwire Wound,
5905-00-812-2741DMS 82080B INTERCHANGEABLE
Resistor,variable,nonwire Wound,
Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)
5905-00-892-9646 INTERCHANGEABLE
Resistor,variable,wire Wound,non
5905-00-914-0566 INTERCHANGEABLE
Resistor,variable,wire Wound,non
5905-00-914-0573 INTERCHANGEABLE
Resistor,variable,nonwire Wound,
5905-00-918-76612100-0427 INTERCHANGEABLE
Resistor,variable,wire Wound,non
Keysight Technologies Inc
5905-00-990-02172100-0962 INTERCHANGEABLE
Resistor,variable,nonwire Wound,
Keysight Technologies Inc
Cross-Reference Index
Part NumberManufacturer
DMS 82080B Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) (USA)
MLC5KM0ACSPDT Mallory Controls Co Sub of Emhart Industries Inc (USA)
Related Parts
5930-00-201-9890INTERCHANGEABLE
SWITCH,ROTARY
5905-00-234-9863INTERCHANGEABLE
RESISTOR,VARIABLE,NONWIRE WOUND,
5930-00-240-4230INTERCHANGEABLE
SWITCH,PUSH
5905-00-279-4910INTERCHANGEABLE
RESISTOR,VARIABLE,NONWIRE WOUND,
5905-00-812-2741INTERCHANGEABLE
RESISTOR,VARIABLE,NONWIRE WOUND,
DMS 82080B
5905-00-892-9646INTERCHANGEABLE
RESISTOR,VARIABLE,WIRE WOUND,NON
5905-00-914-0566INTERCHANGEABLE
RESISTOR,VARIABLE,WIRE WOUND,NON
5905-00-914-0573INTERCHANGEABLE
RESISTOR,VARIABLE,NONWIRE WOUND,
5905-00-918-7661INTERCHANGEABLE
RESISTOR,VARIABLE,WIRE WOUND,NON
2100-0427
5905-00-990-0217INTERCHANGEABLE
RESISTOR,VARIABLE,NONWIRE WOUND,
2100-0962

Frequently Asked Questions

What is NSN 5905-00-375-0183?

NSN 5905-00-375-0183 is a Resistor,variable,wire Wound,non, manufactured by Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings), classified under FSC 5905 (No Item Name Available). Status: active.

What are the part numbers for NSN 5905-00-375-0183?

NSN 5905-00-375-0183 has 2 cross-referenced part numbers: DMS 82080B (Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)), MLC5KM0ACSPDT (Mallory Controls Co Sub of Emhart Industries Inc).

What NSN replaces 5905-00-375-0183?

There are 10 known substitutes for 5905-00-375-0183: 5930-00-201-9890, 5905-00-234-9863, 5930-00-240-4230 and 7 more. Verify interchangeability with system specifications before substitution.

What are the specifications of DMS 82080B?

Key specifications for DMS 82080B: Shaft Diameter: 0.187 INCHES NOMINAL IN; Effective Electrical Rotation in Deg Angular Rotation: 290.0 NOMINAL; Switch Operating Position: ANY POSITION OF ROTATION TRAVEL; Shaft Style: ROUND. 30 total characteristics are documented in the Federal Logistics Information System.

Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com